There are many different types of motor oil. Choosing the best one for your vehicle can be a difficult task, especially if you’re not sure what type will work best for your particular vehicle. This article will help you learn about the best motor oils on the market right now, and which ones are best suited for Dodge Journey models.
The best motor oil for Dodge Journey is the best way to maintain your vehicle. This article will discuss what kind of motor oil you should use, how often it needs to be changed, and the best brands on the market.
How Much Oil Does a Dodge Journey Take?
2020 Dodge Journey takes 4.5 quarts of 5W-20 synthetic oil with a filter. Meet the specifications of Chrysler Material Standard MS-6395 with API Certified SAE 5W-20 Engine Oil. Check your engine oil filler cap for the correct grade of SAE.
The engine’s original oil was a high-quality energy-saving kind of oil. Oil changes should be carried out in accordance with projected climate conditions where the vehicle will be used.
The best motor oil for Dodge Journey is the best way to maintain your vehicle. Additives are expressly forbidden other than leak detection dyes by the manufacturer. Engine oil is an engineered substance, and additional additives may have an impact on its performance.
Dodge recommends using a full synthetic oil with a viscosity rating of SAE 05W-20 in all of its vehicles.
The best way to ensure that you are using the best motor oil for Dodge Journey is by checking your owner’s manual. Many automakers have specific recommendations for the type of engine oil that their vehicles require.
2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Dodge Journey Engine Oil Capacity
2009-2020 Dodge Journey Engine Oil Capacity
3.5L 6-cyl engine:
- Engine Oil Capacity with filter: 5.5 quarts (5.2 liters);
- Oil Type: 10W-30;
- Oil drain plug torque: 30 ft/lbs.
3.6L 6-cyl ERB Flex engine:
Engine Oil Capacity with filter: 5.9 quarts (5.6 liters);
Oil Type: 5W-30, 5W-20;
Oil drain plug torque: 20 ft/lbs.
2.4L 4-cyl EDG engine:
- Engine Oil Capacity with filter: 4.5 quarts (4.3 liters);
- Oil Type: 5W-20;
- Oil drain plug torque: 30 ft/lbs.
2.4L 4-cyl B ED3 engine:
- Engine Oil Capacity with filter: 4.5 quarts (4.3 liters);
- Oil Type: 5W-20;
- Oil drain plug torque: 20-30 ft/lbs.
Dodge Journey 5W-20 Oil
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards*
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Mobil Full Synthetic 5W-20 motor oil is formulated for vehicles upgrading from conventional oil or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent sludge and deposit formation, to help reduce engine wear, and has balanced additive system formulation
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
- Manufacturer Chrysler
- OEM Number 68218891AA
- SAE/Viscosity 5W-20
- Specifications API SN, ILSAC GF-5
- Full synthetic 5W-20 motor oil that is made with natural gas and designed to maximize engine protection
- Backed by a 15,000-mile protection guarantee* to protect your pursuit of every mile
- Provides better fuel economy (based on the latest industry standards)
- Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
- Designed for high-performance engines
- Full synthetic 5W-20 motor oil provides strong engine performance and protection against deposits between oil changes
- Ideal for use in modern turbocharged engines and high-performance vehicles like sports cars, SUVs, trucks, and minivans
- Designed to deliver more power and less friction, reducing friction to maximize horsepower (compared to Quaker State motor oil)
- Provides improved fuel economy (based on the latest industry standard)
- Excellent protection against formation of sludge and other harmful deposits (based on Sequence IIIH & VH tests on 0W-20 engine oil)
Dodge Journey 5W-30 Oil
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Six quarts of SAE 5W-30 Maxpro conventional motor oil.
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards*
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.*
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
Dodge Journey 10W-30 Oil
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic 10W-30 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Proven to minimize everyday wear on your engine by providing consistent lubrication and defense
- Optimize power & fuel efficiency with our low friction technology
- Resist oil breakdown & sludge with added detergents to keep your engine clean
- Exceptional temperature protection defends your engine in even the most severe weather
- Approved for turbo-powered engines, it provides excellent protection to critical turbo unit component.
- Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
Recommended Engine Oil Filter For Dodge Journey
The engine oil filter should be replaced with a new filter at every engine oil change.
A full-flow type oil filter is used by this manufacturer. For replacement, use a filter of this sort. Replacement filters have widely varying quality. Only top-notch filters should be used to guarantee the best service possible. MOPAR recommends using high-quality engine oil filters.
- The Package Length of the Product is 5.8 centimeters
- The Package Width of the Product is 6.7 centimeters
- The Package Height of the Product is 14.6 centimeters
- Country of Origin: UNITED STATES
- Fit type: Vehicle Specific
- Package Dimensions: 9.144 H x 8.128 L x 8.128 W (centimeters)
- Country of Origin : China
- Package Weight: 0.222 kilograms
- Proven protection for up to 10,000 miles
- Engineered for use with conventional or synthetic motor oil
- A special blend of fibers and resin creates a proprietary filter media that captures 95% of dirt particles that can cause harmful engine wear
- Designed for everyday drivers who perform frequent maintenance on their vehicles
- Fit type: Vehicle Specific
- No Batteries Required
- Product Type: Oil Filter
- Product Type:Oil Filter
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- Year: 2011 2012 2013 2014 2015 2016 2017 2018 2019, Oe/Oem Part Number: 4627273AA, Custom Bundle: No
- Oe Spec Or Performance/Custom: OE Spec, Manufacturer Warranty: 1 Year, Model: JOURNEY
- Manufacturer Part Number: 4627273AA, Non-Domestic Product: No, Brand: Compatible with Mopar
- Returns Accepted: Returns Accepted, Certifications: OE, Make: Compatible with Dodge
Last update on 2024-10-10 / Affiliate links / Images from Amazon Product Advertising API