The best motor oil for Cadillac Escalade is a common question. In this article, we will discuss the best options for these vehicles and help you make an informed decision on what type of motor oil to use in your vehicle. We’ll also cover how often you should change your oil and provide some tips that can save you money!
How Much Oil Does a Cadillac Escalade Take?
The 6.2L Cadillac Escalade engine has 8 US quarts of 0W-20 oil with a filter. Oil and filter changes should be done every 7,500 to 10,000 miles or 12 months if using fully synthetic lubricants, or 3,000 to 5,000 miles or 6 months if utilizing conventional oil.
Synthetic vs conventional goods: Synthetic oils are more durable and resistant to heat, resulting in greater lubrication between moving parts, a longer time between servicing appointments, and enhanced effectiveness under adverse weather conditions.
Engine oil with a thinner viscosity flows more easily in cold weather, protecting engine components against friction and rust by efficiently lubricating them. Materials and labor for a lube and filter job cost around $130-$140.
1999 2000 Cadillac Escalade Engine Oil Capacity
1999 2000 Cadillac Escalade Engine Oil Capacity
5.7L 8-cyl engine:
- Engine Oil Capacity with filter: 5.1 quarts (4.8 liters);
- Oil Type: 5W-30, 10W-30;
- Oil pan drain plug tightening torque: 18 ft/lbs.
2001 2002 2003 2004 2005 2006 Cadillac Escalade Engine Oil Capacity
2001-2006 Cadillac Escalade Engine Oil Capacity
6.0L 8-cyl LQ9 engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil pan drain plug tightening torque: 18 ft/lbs.
5.3L 8-cyl LM7 engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil pan drain plug tightening torque: 18 ft/lbs.
2007 2008 2009 2010 2011 2012 2013 2014 Cadillac Escalade Engine Oil Capacity
2007-2014 Cadillac Escalade Engine Oil Capacity
6.2L 8-cyl L94 Flex engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30, 10W-30;
- Oil pan drain plug tightening torque: 18 ft/lbs.
6.0L 8-cyl LZ1 engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil pan drain plug tightening torque: 18 ft/lbs.
2015 2016 2017 2018 2019 2020 Cadillac Escalade Engine Oil Capacity
2015-2020 Cadillac Escalade Engine Oil Capacity
6.2L 8-cyl L86 Flex engine:
- Engine Oil Capacity with filter: 8 quarts (7.6 liters);
- Oil Type: 0W-20;
- Oil pan drain plug tightening torque: 18 ft/lbs.
6.2L 8-cyl L86 engine:
- Engine Oil Capacity with filter: 8 quarts (7.6 liters);
- Oil Type: 0W-20;
- Oil pan drain plug tightening torque: 18 ft/lbs.
2021 2022 Cadillac Escalade Engine Oil Capacity
2021 2022 Cadillac Escalade Engine Oil Capacity
6.2L 8-cyl L87 engine:
- Engine Oil Capacity with filter: 8 quarts (7.6 liters);
- Oil Type: 0W-20;
- Oil pan drain plug tightening torque: 18 ft/lbs.
3.0L 6-cyl LM2 Diesel Turbo engine:
- Engine Oil Capacity with filter: 7 quarts (6.6 liters);
- Oil Type: 0W-20;
- Oil pan drain plug tightening torque: 18 ft/lbs.
Recommended Engine Oil For Cadillac Escalade
5W-30 Oil
- Mobil Full Synthetic High Mileage 5W-30 motor oil is designed for vehicles with over 75,000 miles, upgrading from a conventional or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent oil leaks, sludge, and deposit formation to help reduce engine wear with a balanced additive system formulation and extra seal conditioner
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SL, ACEA A3/B3, A3/B4 & A5/B5, MB 229.5, 229.3 & 226.5, VW 50200/50500 & 50501, BMW LL-01 & LL-14FE+, and Renault RN0700 & RN0710
- Motor Oil
- Low SAPS fully synthetic motor oil for diesel engines
- Use with extended oil change intervals as per manufacturer
- Item Package Weight: 2.22 pounds
- Optimum stability to aging
- Reduces fuel consumption
- Ensures a long service life
- Outstanding engine cleanlines
- Miscible with all commercially available motor oils
- Mobil 1 Extended Performance full-synthetic motor oil 5W-30 helps protect critical engine parts for up to 20,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity.
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
0W-30 Oil
- Low viscosity
- Increase engine efficiency
- Outstanding thermal and oxidation stability
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changes,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SN, ACEA C3, MB 229.5, 229.51, 229.3, 229.31, & 226.5, VW 50200/50500 & 50400/50700, BMW LL-01, LL-04 & LL-01FE, Porche C30, and STJLR.06.5007
- Made from Pennzoil's patented gas-to-liquid PurePlus Technology combined with a high-performance additive system for complete protection
- Full synthetic 0W-30 motor oil formulated for diesel and gasoline engines and is approved for most Mercedes-Benz, VW, Audi, and Porsche vehicles
- Helps keep diesel particulate filters clean and protects the from ash build-up that can block the exhaust system and lead to reduced engine performance
- Provides superior piston cleanliness (up to 45% cleaner, based on DV4TD vs. ACEA C2/Ce using SAE 0W-30 )
- Provides up to 2.6% better fuel economy (based on ACEA M111 fuel economy results vs. the industry reference oil)
- Fit type: Universal
- Package Dimensions: 22.4 H x 6.2 L x 11.8 W (centimetres)
- Package Weight: 0.92 kilograms
- Country of Origin : United States
- Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
10W-30 Oil
- PROVEN TO MINIMIZE EVERYDAY WEAR on your engine by providing consistent lubrication and defense
- OPTIMIZE POWER & FUEL EFFICIENCY with our low friction technology
- RESIST OIL BREAKDOWN & SLUDGE with added detergents to keep your engine clean
- EXCEPTIONAL TEMPERATURE PROTECTION defends your engine in even the most severe weather
- REDUCE COSTLY REPAIRS by protecting critical engine components
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- Formulated to help minimize sludge and varnish formation while resisting thermal breakdown
- Premium mineral-based formula that helps protect against high temperature deposits, such as the formation of sludge and varnish deposits, for additional engine protection
- Provides engine cleanliness by helping to control thermal breakdown and deposit formation under normal driving conditions
- Meets ILSAC GF-6 specifications to fulfill current energy-conserving performance standards
- The ILSAC GF-6 engine oil performance standard is designed to improve fuel economy and enhance engine capabilities for passenger cars
- Enhanced anti-wear additives deliver a thick & durable layer of anti-wear film to help prevent auto engine breakdown
- Added detergents help protect against sludge and deposits
- Premium seal conditioners help treat and prevent leaks
- Superior antioxidants resist motor oil breakdown in extreme conditions
- The information below is per-pack only
- Conventional 10W-30 engine oil formula that keeps engines clean and responsive
- No leading conventional oil provides better wear protection (based on Sequence IVA wear test using SAE 5W-30).
- Helps prevent sludge and other damaging deposits (based on Seq VH Sludge Test)
- Compatible with engine seals and all conventional oils
Recommended Engine Oil Filter For Cadillac Escalade
- Is 20-25% smaller in size, yet has more filtration media for greater capacity
- Has 10 times more open area in the core for improved flow
- Has a steel shell, threaded plate assembly, and leaf spring that can all be recycled
- Has a non-metallic cartridge that can be crushed to remove oil and can then be used as an energy source
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- Exclusive FILTECH media technology screens out more harmful particles and dirt, preventing premature wear and engine failure
- OE fit ensured through strong steel base plates and housings that prevent warpage, leaks and poor fit
- Silicone anti-drain back valve ensures engine receives a supply of clean oil when the vehicle is started
- High lubricity gasket design provides a tight, leak proof seal, yet allows for easy removal when it's time for an oil change; Metal spiral-wound center tube reinforces internal strength for durability
- Compatible with select vehicles (Note: vehicle trim level/engine may affect fitment - verify specific vehicle fitment details with fit checker above): BUICK: 1975-76 Century, 1977 LeSabre, 2004-06 Rainier, 1975-76 Regal, 1975-77 Skylark, 1996-98 Skylark
- Advanced filtration technology and superior filtration performance
- Premium, heavy duty components contribute to a high level of durability, as well as maximum engine protection and fuel efficiency
- Warranted to be free from defects and are fully compatible with conventional oil as well as synthetic, and synthetic blend oils
- New vehicle manufacturer warranties remain in full effect when Pentius UltraFLOW filters are properly installed and installed based on manufacturer recommended service intervals
- Packaged individually in the distinctive Pentius UltraFLOW red and white box
Last update on 2023-09-26 / Affiliate links / Images from Amazon Product Advertising API