Subaru BRZ engine oil capacity is important to know for Subaru BRZ owners. Your Subaru BRZ engine is a precision instrument and deserves the best oil to keep it running in top condition. The right Subaru BRZ oil will help protect your engine against wear and tear and keep it running smoothly for years to come!
2022 Subaru BRZ Engine Oil Capacity
| Engine | 2.4L FA24D |
| Engine Oil Capacity (with filter) | 5.3 quarts |
| Oil type | 0W-20 |
| Drain plug torque | 31 ft/lbs |
2013 2014 2015 2016 2017 2018 2019 2020 2021 Subaru BRZ Engine Oil Capacity
| Engine | 2.0L FA20D |
| Engine Oil Capacity (with filter) | 5.7 quarts |
| Oil type | 0W-20 |
| Drain plug torque | 31 ft/lbs |
Best Subaru BRZ 0W-20 Oil
- Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Provides better fuel economy (based on the latest industry standards)
- Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- Mobil 1 Extended Performance full-synthetic motor oil 0W-20 helps protect critical engine parts for up to 20,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Superior wear protection on critical engine parts
- 6X better wear protection than industry standards, as measured in the latest Sequence IVA test
- Superior sludge cleaning and protection against new formation
- 1.3X better sludge protection than industry standards, as measured in Sequence VH sludge test vs. API SP limits
- Full synthetic formula provides thermal and oxidation stability
When choosing the right oil for your Subaru BRZ, there are a few things to keep in mind. First, you’ll want to choose an oil specifically designed for Subaru BRZ engines. Second, you’ll want to ensure that the oil you choose has the right viscosity for your Subaru BRZ engine. Finally, you’ll want to consider any special additives that your Subaru BRZ engine might need.
Subaru BRZ engines require a specific oil type, so check your owner’s manual or ask your Subaru dealer which oil is best for your car. The oil’s viscosity is also important – too thin, and it won’t protect your engine as well as it should. Too thick, and it can cause problems. Subaru BRZ engines typically use 0W-20 oil.
There are also a few special additives that Subaru BRZ engines might need, depending on where you live and how you drive. Subaru dealers can help determine if your car needs these additives.
Subaru BRZ Oil Filter
- Genuine Subaru Engine Oil Filter
- 15208AA130 (Filter), 803916010 (Crush Gasket)
- Your package will include 3 of each filter and gasket
- 2013-2020 Subaru BRZ
- 2013-2015 Scion FR-S
- Country of Origin: Japan
- High quality
- Fit type: Universal Fit
- Genuine OEM
- Genuine Subaru Part Number: 15208AA130 (Filter), 803916010 (Crush Gasket) Your package will have 3 of each
- 2013-2021 Subaru BRZ
- Remember to change your engine oil and filter every 6 months or every 7,500 miles depending on conditions where you are
- Subaru Engine Oil Filter removes millions of microscopic pollutants and dust particles.
- Check our other listings for air and cabin filters
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
Last update on 2024-04-25 / Affiliate links / Images from Amazon Product Advertising API
