With the best motor oil for Infiniti QX50, you can be sure that your engine is in good shape and will last a long time. This article discusses what to look for in a quality oil for your car so you can find the best option available. We’ll explore some of the best oils on the market, as well as provide tips on how to maintain your car so it stays at its best performance!
The best motor oil for Infiniti QX50 is the best-selling Castrol GTX. This is because it has an advanced formula that allows manufacturers to use it in a wide range of engines without any adverse effects on performance or engine life. The best thing about this motor oil is that you can find it at your local auto supply store, making purchase and installation quick and easy!
How Much Oil Does an Infiniti QX50 Take?
The QX50 takes five quarts of oil, so make sure to have plenty on hand before starting your next oil change! Infiniti QX50 requires 5W-30 synthetic oil.
Only engine oils that have an API certification or an International Lubricant Standardization and Approval Committee (ILSAC) certificate, as well as an SAE viscosity standard, should be used. These oils include the API label on the front of the container. Engine damage may occur if oils do not contain the specified quality label, so they should not be used.
In addition to the best motor oil for Infiniti QX50, you’ll also need some other supplies:
- funnel
- oil filter wrench
- new crush washer (if needed)
- rags or paper towels
- jack and lug wrench (or a car lift!)
After acquiring all of these items, you’re ready to start changing the oil in your Infiniti QX50! Be sure to follow the manufacturer’s recommended intervals for changes – typically every 7000 miles or every six months.
When your car was built, it was filled with high-quality engine oil. There is no need to replace the oil before the first suggested change interval. Oil and filter replacement guidelines are determined by how you drive your automobile.
Engine oil viscosity changes with temperature. As a result, it’s critical to choose an engine oil viscosity according to the temperatures at which the car will be operated before the next oil change. Using an oil viscosity other than that recommended may cause significant engine damage.
2019 2020 2021 2022 Infiniti QX50 Engine Oil Capacity
2019 2020 2021 2022 Infiniti QX50 Engine Oil Capacity
2.0L 4-cyl KR20DDET Turbo engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 5W-30;
- Oil drain plug torque: 25 ft/lbs.
2014 2015 2016 2017 Infiniti QX50 Engine Oil Capacity
2014-2017 Infiniti QX50 Engine Oil Capacity
3.7L 6-cyl VQ37VHR engine:
- Engine Oil Capacity with filter: 5.2 quarts (4.9 liters);
- Oil Type: 5W-30;
- Oil drain plug torque: 25 ft/lbs.
Infiniti QX50 5W-30 Oil
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Mobil 1 advanced full-synthetic motor oil 5W-30 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Our most advanced full synthetic 5W-30 engine oil, designed for unbeatable engine protection*
- Pennzoil Ultra Platinum comes with a 20-year, 750,000 mile warranty** to protect your engine and give you peace of mind to drive every mile as hard as you can
- Made with natural gas
- Outstanding performance in extreme temperatures
- Designed for high-performance engines, it helps protect engines from loss of power
- MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
- REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
- REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
- ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- As measured in Sequence VH sludge test vs. API SP limits
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SP, ACEA C3, MB-Approval 229.52, MB-Approval 229.51, MB-Approval 229.31, MB 229.5, MB 229.3, MB 226.5, Approved under VW Standard 504.00/507.00, VW 502.00/505.00, VW 505.01, BMW LL-01, BMW LL-04, Porsche C30, Opel/Vauxhall OV0401547, Chrysler MS-13340
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A3
- Or one year, whichever comes first
Recommended Engine Oil Filter For Infiniti QX50
- LONG LIFE DESIGN: Up to 20,000 mile engine protection. Follow your manufacturers change intervals
- HIGH FILTERATION EFFICIENCY: Captures 99% of contaminate greater than 30 micron
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic oil, conventional oil, high mileage and synthetic blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- PREMIUM PERFORMANCE: Laboratory tested to ensure excellent filtration and premium quality
- Exclusive FILTECH media technology screens out and holds on to up to 14 grams of dirt and particles, preventing it from circulating throughout your engine and causing damaging wear that can lead to engine failure
- OE fit ensured through strong steel base plates and housings that prevent warpage, leaks and poor fit
- Silicone anti-drain back valve ensures engine receives a supply of clean oil when the vehicle is started
- High lubricity gasket design provides a tight, leak proof seal, yet allows for easy removal when it's time for an oil change; Metal spiral-wound center tube reinforces internal strength for durability
- Compatible with select vehicles including, but not limited to, the following (Note: vehicle trim level/engine may affect fitment - verify specific vehicle fitment details with fit checker above): CHEVROLET: 15-18 City Express; HONDA: 00-06 Insight
- Proven protection for up to 10,000 miles
- Engineered for use with conventional or synthetic motor oil
- A special blend of fibers and resin creates a proprietary filter media that captures 95% of dirt particles that can cause harmful engine wear
- Designed for everyday drivers who perform frequent maintenance on their vehicles
- 95% dirt-trapping efficiency
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
Last update on 2025-07-11 / Affiliate links / Images from Amazon Product Advertising API