What is the best motor oil for Lincoln Corsair? It’s a question many people have been asking themselves lately. As the gas prices rise, more and more people are taking a look at their vehicles to see what they can do to conserve energy. One of the best ways that you can do this is by finding out which type of motor oil works best for your vehicle. In this article, we will discuss how choosing the best motor oil for Lincoln Corsair will save you money on fuel costs in just one year!
The best motor oil for these cars should meet the following requirements:
- It must have oil meeting WSS-M2C963-A1 classification; SAE viscosity grade 10W-30 or 15W-40; and offer protection against wear, rust, and corrosion.
- It must also be compatible with all engine types (gasoline/diesel) as well as turbochargers, fuel pumps, and catalytic converters.
Use 0W-30 oil meeting WSS-M2C963-A1 to help improve cold start in extremely cold climates where the ambient temperature is -22 F (-30 C) or lower.
How Much Oil Does a Lincoln Corsair Take?
The Lincoln Corsair holds about six quarts of oil or just over five liters. For example, 2.5L Lincoln Corsair takes 5.7 quarts of 0W-20 oil and 2.3L Lincoln Corsair Turbo takes 5.5 quarts of 5W-30 oil.
You will also need to replace the filter, which usually costs between $15 and $30.
Be sure to dispose of used motor oil in a responsible manner; many service stations and auto parts stores offer free recycling services.
Changing your car’s oil every 5000 miles (or 8000 kilometers) is a good rule of thumb, but you may need to change it more or less often depending on your driving habits and the type of oil you use.
2020 2021 2022 Lincoln Corsair Engine Oil Capacity
2020 2021 Lincoln Corsair Engine Oil Capacity
2.5L 4-cyl 99Z engine:
- Engine Oil Capacity with filter: 5.7 quarts (5.4 liters);
- Oil Type: 0W-20;
- Oil pan drain plug tightening torque: 21 ft/lbs.
2.3L 4-cyl 99H Turbo engine:
- Engine Oil Capacity with filter: 5.5 quarts (5.2 liters);
- Oil Type: 5W-30, 0W-30;
Use 0W-30 oil meeting WSS-M2C963-A1 to help improve cold start in extremely cold climates where the ambient temperature is -22 F (-30 C) or lower. - Oil pan drain plug tightening torque: 20 ft/lbs.
2.0L 4-cyl 999 Turbo engine:
- Engine Oil Capacity with filter: 5.5 quarts (5.2 liters);
- Oil Type: 5W-30, 0W-30;
Use 0W-30 oil meeting WSS-M2C963-A1 to help improve cold start in extremely cold climates where the ambient temperature is -22 F (-30 C) or lower. - Oil pan drain plug tightening torque: 20 ft/lbs.
Lincoln Corsair 0W-20 Oil
- Motorcraft 0W-20 Oil - XO0W205QFS
- Item Package Dimension: 12.99L x 8.99W x 3.99H inches
- Item Package Weight - 9.49 Pounds
- Item Package Quantity - 1
- Product Type - AUTO OIL
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Provides better fuel economy (based on the latest industry standards)
- Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, dexos 1 Gen 2
- Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
- Mobil 1 High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Our best performing high-mileage motor oil is formulated with Ultra MaxLife Technology, the ultimate protection for vehicles with more than 75,000 miles
- Valvoline Extended Protection Full Synthetic High Mileage Motor Oil is designed with premium seal conditioners to treat and prevent oil leaks
- 10X stronger against oil breakdown and 50% greater wear protection than industry standards
- Enhanced wear additives and friction-fighting agents to safeguard critical engine components
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
Lincoln Corsair 5W-30 Oil
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
- Extra wear protection designed to help keep automotive engine parts like new
- Added detergents help protect against sludge and deposits
- High quality additives resist motor oil breakdown in tough conditions
- Low-friction formula supports strong fuel efficiency
- Castrol GTX Full Synthetic Motor Oil provides maximum protection to help fight the impact of severe conditions that can potentially shorten engine life
- Castrol GTX Full Synthetic has been proven to dramatically reduce engine wear - 6X better than the industry standard
- 1.3X better sludge protection than industry standards
- Full synthetic formula provides thermal and oxidation stability with a superior level of protection against viscosity breakdown
- Specifications: API SP/SN PLUS/SN, ILSAC GF-6, GM dexos1 Gen 2
- MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
- REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
- REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
- ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- Mobil Full Synthetic 5W-30 motor oil is formulated for vehicles upgrading from conventional oil or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes
- Helps to prevent sludge and deposit formation, to help reduce engine wear, and has balanced additive system formulation
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- Full synthetic 5W-30 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
Lincoln Corsair 0W-30 Oil
- Low viscosity
- Increase engine efficiency
- Outstanding thermal and oxidation stability
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changes,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SN, ACEA C3, MB 229.5, 229.51, 229.3, 229.31, & 226.5, VW 50200/50500 & 50400/50700, BMW LL-01, LL-04 & LL-01FE, Porche C30, and STJLR.06.5007
- Mobil Full Synthetic 5W-30 motor oil is formulated for vehicles upgrading from conventional oil or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes
- Helps to prevent sludge and deposit formation, to help reduce engine wear, and has balanced additive system formulation
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- 42 percent better rating on fighting power robbing deposits
- Superior engine protection versus conventional and synthetic blend oils
- Superior performance against deposits, wear and oxidation
- Meets BMW Longlife 01, GM-LL-A-025, GM-LL-B-025, Mercedes Benz 229.1, 229.3, 229.5, Volkswagen 505.00, 502.00
- Exceeds API SL, ACEA A3, ACEA B3, ACEA B4
Recommended Engine Oil Filter For Lincoln Corsair
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
- COMPATIBLE with Ford F-150 2.7L 2015-2020, Edge 2.7L 2015-2020, Explorer 3.0L 2020-2021, Fusion 2.7L 2017-2019, Mustang 5.2L 2018-2020, Police Interceptor Utility 3.0L 2020-2021 | Lincoln MKX 2.7L 2016-2018, Aviator 3.0L 2020-2021
- [cont.] Continental 2.7L 2017-2020, MKZ 3.0L 2017-2020, Continental 3.0L 2017-2020, Aviator 3.0L HYBRID 2021
- REPLACES FORD FT4E-6714AA, FT4Z-6731A, FRAM CH11955, MOTORCRAFT FL2062, PUROLATOR L38154, WIX WL10050
- BUILT for both SYNTHETIC AND CONVENTIONAL OILS. Proven to drive up to 5,000 miles between oil changes with confidence.
- GREATER ENGINE PROTECTION by optimally screening out 97% of harmful contaminants such as such as carbon, sand, dust and bits of metal before they can get into your engine.
- Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
- LONG LIFE DESIGN: Up to 20,000 mile engine protection. Follow your manufacturers change intervals
- HIGH FILTERATION EFFICIENCY: Captures 99% of contaminate greater than 30 micron
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic oil, conventional oil, high mileage and synthetic blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- PREMIUM PERFORMANCE: Laboratory tested to ensure excellent filtration and premium quality
Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API