The best motor oil for GMC Canyon is a question that many drivers ask themselves. There are several things to consider when choosing an oil, such as the type of engine you have and how often you drive your vehicle. In this article, we will go over everything there is to know about GMC Canyon oils, including all the best brands and what each one has to offer!
If you own a GMC Canyon, then it is important to maintain the best motor oil. If you are not sure what type of best motor oil your car needs, then be sure to ask your mechanic or local gas station attendant for help. There are many different types of best motor oils that can suit any vehicle and driver’s needs!
How Much Oil Does A GMC Canyon Take?
New 3.6L GMC Canyon takes 6 quarts of 0W-30 oil with a filter. The 2.5L GMC Canyon takes 5 quarts of 0W-20 oil.
GMC factory dealer recommends using ACDelco Dexos1 Full Synthetic engine oil for your GMC Canyon.
The engine is full of fast-moving parts. Heat is generated by the friction between these components. Everything gets lubricated and prevents sticking thanks to oil. As oil engine oil becomes old, it begins to break down and lose viscosity. Oil with a lower viscosity provides less protection for your engine. An oil change replaces all of the old, broken-down oil and any contaminants in the engine with fresh new oil. Your engine’s potential for seizing up completely increases if you don’t get an oil change on a regular basis.
2021 2022 GMC Canyon Engine Oil Capacity
2021 2022 GMC Canyon Engine Oil Capacity
3.6L 6-cyl N LGZ engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil drain plug torque: 18 ft/lbs.
2.8L 4-cyl LWN Diesel Turbo engine:
- Engine Oil Capacity with filter: 5.9 quarts (5.6 liters);
- Oil Type: 5W-30, 0W-40;
- Oil drain plug torque: 18 ft/lbs.
2.5L 4-cyl A LCV engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 18 ft/lbs.
2015 2016 2017 2018 2019 2020 GMC Canyon Engine Oil Capacity
2015-2020 GMC Canyon Engine Oil Capacity
3.6L 6-cyl N LGZ engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil drain plug torque: 18 ft/lbs.
3.6L 6-cyl LFX engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil drain plug torque: 18 ft/lbs.
2.8L 4-cyl LWN Diesel Turbo engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-40;
- Oil drain plug torque: 18 ft/lbs.
2.5L 4-cyl A LCV engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 5W-20, 0W-20;
- Oil drain plug torque: 18 ft/lbs.
2004 2005 2006 2007 2008 2009 2010 2011 2012 GMC Canyon Engine Oil Capacity
2004-2012 GMC Canyon Engine Oil Capacity
5.3L 8-cyl LH9 engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil drain plug torque: 18 ft/lbs.
3.7L 5-cyl engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil drain plug torque: 19 ft/lbs.
3.5L 5-cyl engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: SAE 5W-30;
- Oil drain plug torque: 19 ft/lbs.
2.9L 4-cyl engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 5W-30, 0W-30;
- Oil drain plug torque: 19 ft/lbs.
2.8L 4-cyl engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: SAE 5W-30;
- Oil drain plug torque: 19 ft/lbs.
GMC Canyon 5W-30 Oil
- Designed to help provide maximum protection for your vehicle’s engine
- Meets the industry standards for automotive engine wear protection to provide top-of-the-line engine support
- Meets ILSAC GF-6 specifications to fulfill current energy-conserving performance standards
- The ILSAC GF-6 engine oil performance standard is designed to improve fuel economy and enhance engine capabilities for passenger cars
- Meets API SN Plus Service Classification requirements to be suitable for use in modern engines
- Designed to help provide protection for your vehicle’s engine
- Licensed to the dexos1 Gen 2 engine oil specification, which is the General Motors’ OEM engine oil specification
- Meets ILSAC GF-5 specifications to fulfill current energy-conserving performance standards
- Meets API SN Service Classification requirements to be suitable for use in modern engines
- Helps protect against high-temperature deposits to reduce engine wear
- Synthetic blend 5W-30 engine oil formula that keeps engines clean and responsive
- No leading synthetic blend motor oil provides better wear protection (based on Sequence IVA wear test using SAE 5W-30)
- Helps prevent sludge and other damaging deposits (based on Seq VH Sludge Test)
- Compatible with engine seals and all conventional oils
- Suitable for all car, SUV, light van, and truck gasoline engines under all driving conditions (For vehicles calling for ILSAC GF-6A, API SP-RC and all previous categories; Chrysler MS-6395)
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
GMC Canyon 5W-20 Oil
- Designed to help provide protection for your vehicle’s engine
- Licensed to the dexos1 Gen 2 engine oil specification, which is the General Motors’ OEM engine oil specification
- Meets ILSAC GF-5 specifications to fulfill current energy-conserving performance standards
- Meets API SN Service Classification requirements to be suitable for use in modern engines
- Helps protect against high-temperature deposits to reduce engine wear
- Full synthetic 5W-20 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
- Mobil 1 High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual
- The package length is 10.921 centimeters
- The package height is 20.32 centimeters
- The package width is 6.096 centimeters
GMC Canyon 0W-30 Oil
- Designed to help provide maximum protection for your vehicle’s engine
- Meets the industry standards for automotive engine wear protection to provide top-of-the-line engine support
- Meets ILSAC GF-6 specifications to fulfill current energy-conserving performance standards
- The ILSAC GF-6 engine oil performance standard is designed to improve fuel economy and enhance engine capabilities for passenger cars
- Meets API SN Plus Service Classification requirements to be suitable for use in modern engines
- Item Package Dimension: 6.8L x 3.9W x 1.9H inches
- Item Package Weight - 1.8 Pounds
- Item Package Quantity - 1
- Product Type - AUTO OIL
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changes,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Meets the highest U.S. standards for automotive engine wear protection to provide top-of-the-line engine support
- Meets ILSAC GF-5 specifications to fulfill current energy-conserving performance standards
- Meets API SN Service Classification requirements to be suitable for use in modern engines
- Provides protection against high-temperature deposits to reduce engine wear
- Provides protection against viscosity breakdown for long oil life and drain intervals
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SN, ACEA C3, MB 229.5, 229.51, 229.3, 229.31, & 226.5, VW 50200/50500 & 50400/50700, BMW LL-01, LL-04 & LL-01FE, Porche C30, and STJLR.06.5007
GMC Canyon 0W-40 Oil
- Reduce particulate buildup in diesel particulate filters
- Reduce poisoning of gasoline catalytic converters
- Reduce deposits and sludge buildup to enable long and clean engine life
- Reduce oil aging, allowing extended drain interval protection
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Full synthetic 0W-40 engine oil with PurePlus Technology that is race trusted for extreme engine performance and is made with natural gas.
- Pennzoil Ultra Platinum comes with warranty coverage of up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Feel the difference of next level performance, on or off the track, with Pennzoil Ultra Platinum motor oil designed to deliver complete engine protection.
- Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
- Pennzoil Ultra Platinum 0W-40 is the only motor oil trusted to be factory fill in every Chrysler SRT8 HEMI engine, and the SRT Viper (Chrysler, HEMI, SRT, and SRT8 are registered trademarks of Chrysler Group LLC)
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SN, ACEA A3/B3, A3/B4, & C3, MB 229.5, 229.3, & 226.5, VW 50200/50500 & 50501, BMW LL-01, Porche A40, Renault RN0700 & RN0710, and Chrysler MS-12633/ MS-10725
- Fits 2011-2019 Dodge Challenger
- 2011-2019 Dodge Charger
- 2012-2019 Chrysler 300
- 2012-2019 Jeep Grand Cherokee
GMC Canyon 0W-20 Oil
- Exceeds ILSAC GF-5/APIstandards for protection against deposits, wear, and low speed preignition, especiallyturbocharged engines.
- Exceeds ILSAC GF-5/APIstandards for protection against deposits, wear, and low speed preignition, especiallyturbocharged engines.
- Meets ILSAC GF-5 specificationsfulfill current energy-conserving performance standards
- Meets APIService Classification requirementsbe suitable for usemodern engines
- 7 Quarts of Oil
- Oil Type: Synthetic
- Viscosity Grade: SAE 0W-20
- Quantity: 7 bottles
- OEM Approvals: GM dexosD
- Designed to help provide maximum protection for your vehicle’s engine
- Meets the industry standards for automotive engine wear protection to provide top-of-the-line engine support
- Meets ILSAC GF-6 specifications to fulfill current energy-conserving performance standards
- The ILSAC GF-6 engine oil performance standard is designed to improve fuel economy and enhance engine capabilities for passenger cars
- Meets API SN Plus Service Classification requirements to be suitable for use in modern engines
- 7 Quarts of Oil
- 1 PF66 FILTER
- Oil Type: Synthetic
- OEM Approvals: GM dexosD
- Viscosity Grade: SAE 0W-20
- Meets the highest U.S. standards for automotive engine wear protection to provide top-of-the-line engine support
- Meets ILSAC GF-5 specifications to fulfill current energy-conserving performance standards
- Meets API SN Service Classification requirements to be suitable for use in modern engines
- Provides protection against high-temperature deposits to reduce engine wear
- Provides protection against viscosity breakdown for long oil life and drain intervals
- Item Package Dimension: 6.8L x 3.9W x 1.9H inches
- Item Package Weight - 1.8 Pounds
- Item Package Quantity - 1
- Product Type - AUTO OIL
Recommended Engine Oil Filter For GMC Canyon
- Fitment:Oil filter for Buick Encore 1.4L 2013-2020,Chevy Cruze 1.4L 2011-2015,GMC Canyon 3.6L 2017-2020 and more.
- Reference number:PF2257G,55576499,55588497,55594651,93185674,5650359,CH10246,72260WS,57674,PS-7027,HU612/2X.
- Application:98% filtering efficiency,25 to 30 microns,provide clean oil to engine components.Designed five times more pressure than most engine oil after the oil reaches operating temperatures.
- Warm hint:If the filter is not replaced for a long time, the mechanical wear will be aggravated, and the debris and impurities which was generated during operation can not be effectively filtered,That will damage the engine.So please replace oil filter regularly.
- Package includes:1 x oil filter element,1 x o-ring.
- Helps keep abrasive particles away from bearings and other engine hydraulic components
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
- COMPATIBLE with Chevrolet Colorado 2. 8L DIESEL 2016-2020 | GMC Canyon 2. 8L DIESEL 2016-2020
- REPLACES FRAM CH12069, PUROLATOR L31385, WIX WL10286, GM 12670806, 12679114, 55484646, 55484962, 55595791
- BUILT for both SYNTHETIC AND CONVENTIONAL OILS. Proven to drive up to 5, 000 miles between oil changes with confidence.
- GREATER ENGINE PROTECTION by optimally screening out 97% of harmful contaminants such as such as carbon, sand, dust and bits of metal before they can get into your engine.
- HASSLE-FREE INSTALLATION with included O-rings for housing and cap.
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- Engineered to deliver up to 5,000 miles of engine protection
- 96% Multi-Pass efficiency and removal of particles as small as 20 microns
- Anti-drain back valve with high retention power to help protect the engine during start-up
- Nitrile gasket provides a consistent seal to prevent leaks
- Replaces GENERAL MOTORS 12679114, 55595791 Oil Filter. Always check fitment using the Vehicle Filter
- Helps keep abrasive particles away from bearings and other engine hydraulic components
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco is a division of General Motors that specializes in automobile parts. ACDelco is the brand used to market GM-made components and aftermarket goods for non-GM vehicles.
Last update on 2024-03-19 / Affiliate links / Images from Amazon Product Advertising API