Mazda CX-30 is a brand new crossover SUV that was just released for the 2020 model year. If you are the proud owner of a Mazda CX-30, you will want to ensure that you use the best engine oil for Mazda CX-30.
This article will discuss the different oil types available for your vehicle and recommend the best engine oil for the Mazda CX-30.
2020 2021 2022 Mazda CX-30
Engine Oil Capacity
| Engine | 2.5L 4-cyl Engine Turbo | 2.5L 4-cyl Engine |
| Engine Oil Capacity (with filter) | 5.1 quarts (4.8 liters) | 4.8 quarts (4.5 liters) |
| Oil type | 5W-30, 0W-30, 10W-30 | 0W-20 |
| Drain plug torque | 23-30 ft/lbs | 23-30 ft/lbs |
Recommended Engine Oil For Mazda CX-30
Mazda CX-30 0W-20 Oil
SaleItem No. 1
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil 5 QT
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
SaleItem No. 2
Mobil 1 Extended Performance Full Synthetic Motor Oil 0W-20, 5 Quart
- Mobil 1 Extended Performance full-synthetic motor oil 0W-20 helps protect critical engine parts for up to 20,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
SaleItem No. 3
Castrol EDGE 0W-20 Advanced Full Synthetic Motor Oil, 5 Quarts
- 3X Stronger against viscosity breakdown than leading full synthetic* *Viscosity breakdown as measured in Kurt Orbahn test on 5W-30
- 10X Better high stress performance** **As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- 20,000 miles between oil changes*** ***Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SP/SN PLUS/SN/SM
Mazda CX-30 0W-30 Oil
SaleItem No. 1
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil 5 QT
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
SaleItem No. 2
Mobil 1 Advanced Fuel Economy Full Synthetic Motor Oil 0W-30, 5 Quart
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changes,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
SaleItem No. 3
Castrol EDGE 0W-20 Advanced Full Synthetic Motor Oil, 5 Quarts
- 3X Stronger against viscosity breakdown than leading full synthetic* *Viscosity breakdown as measured in Kurt Orbahn test on 5W-30
- 10X Better high stress performance** **As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- 20,000 miles between oil changes*** ***Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SP/SN PLUS/SN/SM
Mazda CX-30 5W-30 Oil
SaleItem No. 1
Valvoline Advanced Full Synthetic SAE 5W-30 Motor Oil 5 QT
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
SaleItem No. 2
Valvoline High Mileage with MaxLife Technology SAE 5W-30 Synthetic Blend Motor Oil 5 QT
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
Item No. 3
Genuine Mazda Accessories (0000-77-5W30-QT) SAE 5W-30 Super Premium Motor Oil - 1 Quart
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
The best engine oil for Mazda CX-30 is synthetic oil. Mazda recommends using a synthetic oil that meets the Mazda Genuine Oil Standard. The Mazda Genuine Oil Standard is a proprietary standard that is designed to meet the specific needs of Mazda vehicles. If you are not sure which type of oil to use, we recommend contacting your local Mazda dealership for assistance.
The Benefits of Using The Best Engine Oil For Mazda CX-30
There are several benefits of using the best engine oil for the Mazda CX-30. First, using a synthetic oil that meets the Mazda Genuine Oil Standard will help to protect your engine and extend the life of your vehicle. Additionally, using high-quality oil can improve fuel economy and performance. Finally, using a Mazda-recommended oil can help maintain your vehicle’s warranty.
Mazda CX-30 Engine Oil Filter
Item No. 1
UINIEBOOM Engine Oil Filter For Mazda 3 CX-30 CX-5 CX-50 MX-5 Miata 6 CX-3 2012-2023 Replace PE01-14-302 1WPE-14-302
- 【Excellent performance】Our Engine Oil Filter is engineered to provide outstanding filtration performance, trapping harmful contaminants and particles to keep your engine clean and protected.
- 【High-quality】Constructed with precision and using high quality materials, this oil filter is durable and reliable, ensuring long service life.
- 【Easy Installation】The Engine Oil Filter is easy to install and is compatible with a wide range of engine models, making it a convenient choice for vehicle owners.
- 【Manufacturer Part Number】1WPE-14-302, PE01-14-302.
- 【Fitment】This Oil Filter Compatible with for Mazda 6 2014-2017 ,for Mazda CX-3 2016-2017,for MAZDA 3 SKYACTIV 2012-2017,for MAZDA CX-5 SKYACTIV 2013-2017,for Mazda Miata( Including RF)2016-2017
SaleItem No. 2
K&N Select Oil Filter: Designed to Protect your Engine: Fits Select INFINITI/MAZDA/NISSAN/SUBARU Vehicle Models (See Product Description for Full List of Compatible Vehicles), SO-1008
- LONG LIFE DESIGN: Up to 20,000 mile engine protection. Follow your manufacturers change intervals
- HIGH FILTERATION EFFICIENCY: Captures 99% of contaminate greater than 30 micron
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic oil, conventional oil, high mileage and synthetic blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- PREMIUM PERFORMANCE: Laboratory tested to ensure excellent filtration and premium quality
Item No. 3
BOSCH 3300 Premium Oil Filter With FILTECH Filtration Technology - Compatible With Select Chevrolet, Ford, Honda, Infiniti, Kia, Mazda, Mercury, MG, Nissan + More
- Exclusive FILTECH media technology screens out and holds on to up to 14 grams of dirt and particles, preventing it from circulating throughout your engine and causing damaging wear that can lead to engine failure
- OE fit ensured through strong steel base plates and housings that prevent warpage, leaks and poor fit
- Silicone anti-drain back valve ensures engine receives a supply of clean oil when the vehicle is started
- High lubricity gasket design provides a tight, leak proof seal, yet allows for easy removal when it's time for an oil change; Metal spiral-wound center tube reinforces internal strength for durability
- Compatible with select vehicles including, but not limited to, the following (Note: vehicle trim level/engine may affect fitment - verify specific vehicle fitment details with fit checker above): CHEVROLET: 15-18 City Express; HONDA: 00-06 Insight
SaleItem No. 4
Zieichy 1Pcs Engine Oil Filter Compatible with Mazda 2012-2023 3 CX-30 CX-5 CX-50 MX-5 Miata 6 CX-3, Replace 1WPE-14-302 PE01-14-302
- 【Package Include】:1x Oil Filter
- 【Manufacturer Part Number】:1WPE-14-302，PE01-14-302
- 【Fitment】:This Oil Filter Compatible with：2014-2017 for Mazda 6；2016-2017 for Mazda CX-3；2012-2017 for MAZDA 3 SKYACTIV ；2013-2017 for MAZDA CX-5 SKYACTIV ；2016-2017 for Mazda Miata( Including RF)
- 【High Quality】：Made with high quality plastic material for long-lasting durability and reliability.Tested to meet OEM quality standards.The product is durable and easy to install.
- 【Satisfaction】:For all questions about our products, you can contact us at any time and we will provide you with all the services you need!
Mazda CX-30 engines come with a Mazda-recommended engine oil filter. The Mazda-recommended engine oil filter is designed to meet the specific needs of your Mazda CX-30. If you are not sure which type of oil filter to use, we recommend contacting your local Mazda dealership for assistance.
How Much Oil Does a Mazda CX-30 Take?
The Mazda CX-30 Turbo takes a total of 5.1 quarts of oil. The 2.5l engine takes 4.8 quarts of oil with a filter. This means you will need to purchase five quarts of oil when changing the oil in your Mazda CX-30.
How Often Should I Change The Oil In My Mazda CX-30?
Mazda recommends changing the oil in your Mazda CX-30 every 12 months or 12,000-16,000 miles, whichever comes first. If you drive your vehicle under severe conditions, Mazda recommends changing the oil every six months or 6000 miles, whichever comes first.
Last update on 2024-11-04 / Affiliate links / Images from Amazon Product Advertising API
