What is the best motor oil for Lincoln Nautilus? There are many factors to consider when you are trying to figure out what best motor oil for your car. Factors such as the type of engine your car has, the climate where you live and so much more. The best way to find out which best motor oil is best for your Lincoln Nautilus is by reading this article!
The best motor oil for Lincoln Nautilus is the one that meets Ford’s requirements. If you have a new vehicle or an older one, you can check your owner’s manual first before buying any type of engine oil. Different manufacturers require different types of oils – some are designed for fuel economy while others are designed to provide maximum protection against engine wear and tear.
How Much Oil Does a Lincoln Nautilus Take?
New 2.7L Lincoln Nautilus takes 6 quarts of 5W-30 oil. 2.0L Lincoln Nautilus takes 5.5 quarts of 5W-30 oil. Oil and oil filter should be changed at every 5,000 miles (8,000 km). Your vehicle has an oil-change reminder built in that determines when you should change the engine oil based on how it’s driven.
Lincoln Nautilus best motor oil: 5W-30 meeting WSS-M113326-S0A.
The best type of engine oil is determined by your vehicle’s manufacturer and the requirements for that particular model.
2019 2020 2021 2022 Lincoln Nautilus Engine Oil Capacity
2019-2022 Lincoln Nautilus Engine Oil Capacity
2.7L 6-cyl P Turbo engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 0W-30;
Follow the oil recommendation for a cold start in extremely cold locations where the ambient temperature is -22 F (-30 C) or below. Use 0W-30 meeting WSS-M2C963-A1 to improve cold starting in such climates. - Oil pan drain plug tightening torque: To replace the oil drain plug, rotate it 120 degrees clockwise. To remove the oil drain plug, turn it counterclockwise by hand until it comes out.
2.0L 4-cyl Turbo engine:
- Engine Oil Capacity with filter: 5.5 quarts (5.2 liters);
- Oil Type: 5W-30, 0W-30;
Follow the oil recommendation for a cold start in extremely cold locations where the ambient temperature is -22 F (-30 C) or below. Use 0W-30 meeting WSS-M2C963-A1 to improve cold starting in such climates. - Oil pan drain plug tightening torque: 20 ft/lbs.
Lincoln Nautilus 5W-30 Oil
- Mobil Full Synthetic High Mileage 5W-30 motor oil is designed for vehicles with over 75,000 miles, upgrading from a conventional or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent oil leaks, sludge, and deposit formation to help reduce engine wear with a balanced additive system formulation and extra seal conditioner
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SL, ACEA A3/B3, A3/B4 & A5/B5, MB 229.5, 229.3 & 226.5, VW 50200/50500 & 50501, BMW LL-01 & LL-14FE+, and Renault RN0700 & RN0710
- Enhanced anti-wear additives deliver a thick & durable layer of anti-wear film to help prevent auto engine breakdown
- Added detergents help protect against sludge and deposits
- Premium seal conditioners help treat and prevent leaks
- Superior antioxidants resist motor oil breakdown in extreme conditions
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, dexos 1 Gen 2
- Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology
- No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine)
- Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30)
- Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20)
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
Lincoln Nautilus 0W-30 Oil
- Low viscosity
- Increase engine efficiency
- Outstanding thermal and oxidation stability
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changes,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Made from Pennzoil's patented gas-to-liquid PurePlus Technology combined with a high-performance additive system for complete protection
- Full synthetic 0W-30 motor oil formulated for diesel and gasoline engines and is approved for most Mercedes-Benz, VW, Audi, and Porsche vehicles
- Helps keep diesel particulate filters clean and protects the from ash build-up that can block the exhaust system and lead to reduced engine performance
- Provides superior piston cleanliness (up to 45% cleaner, based on DV4TD vs. ACEA C2/Ce using SAE 0W-30 )
- Provides up to 2.6% better fuel economy (based on ACEA M111 fuel economy results vs. the industry reference oil)
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SN, ACEA C3, MB 229.5, 229.51, 229.3, 229.31, & 226.5, VW 50200/50500 & 50400/50700, BMW LL-01, LL-04 & LL-01FE, Porche C30, and STJLR.06.5007
- Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology
- No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine)
- Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30)
- Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20)
Recommended Engine Oil Filter For Lincoln Nautilus
- MAXIMUM PERFORMANCE: Luberfiner oil filter have a micro-glass synthetic and cellulose medias that provide high filtering efficiency and dirt-holding capacity
- CONSTRUCTION: Luberfiner oil filters are made alongside the world’s leading private label and original equipment manufacturer’s filters. This ensures the most stringent filter construction requirements are met for maximum protection on today’s demanding engines
- EXTREME RESISTANCE: Our oil filters are engineered with Center cores that resist high-pressure surges
- PROTECTS ENGINE: Luberfiner oil filters offer high quality filtration that protects your engine when experiencing harsh environments, dusty or dirty roads, sub-zero climate operation and cold start-ups
- HIGH EFFICIENCY: Our oil filters use filtration media engineered with a variety of natural and synthetic fibers for optimum efficiency, capacity, and flow restriction
- PUR exclusive enhanced HVAC filters up to 99.7% of dust, pollen and contaminants
- PUR exclusive honeycombed weaves are USA-engineered to last up to 15,000 miles, 25% longer than standard performance of 12,000 miles
- PUR filter use thick, industrial strength electrostatic media to trap even the tiniest of particles while densely packed 3-Stage filtration avoids gases and odours from entering the cabin
- Designed with 3 premium layers of filtration: dirt filter for road debris, sterile electrostatic filter to block pollen, microscopic particles and an activated carbon layer adsorption filter to soak up exhaust fumes
- Contains purified-soda that cleans the outside air flowing through the ventilation system
- Exclusive FILTECH media technology screens out more harmful particles and dirt, preventing premature wear and engine failure
- OE fit ensured through strong steel base plates and housings that prevent warpage, leaks and poor fit
- Silicone anti-drain back valve ensures engine receives a supply of clean oil when the vehicle is started
- High lubricity gasket design provides a tight, leak proof seal, yet allows for easy removal when it's time for an oil change
- Metal spiral-wound center tube reinforces internal strength for durability
- Vehicle Fitment Notes: V6 2.7L, 2015-20 Compatible with Ford Edge Engine Oil Filter
- Designed With The Latest Software And Manufactured With Modern Tooling
- Direct Fit Replacement
- Installs The Same As Factory Unit
- Same Dimensions As OE Part
If your information display resets on its own or becomes inoperative, you should perform the oil change interval every six months or 5,000 miles (8,000 kilometers) after your previous oil change. Never go more than a year without changing the oil.
In such a case, oil usage may be higher than normal because you’re driving a high-performance automobile. Extended periods at high engine speeds, heavy loads, engine braking, tight turning motions, track and off-road usage can all cause higher oil use. Oil consumption of approximately 1 quart every 500 miles (1 liter per 800 km) can be expected under these circumstances.
Check the engine oil level at every refueling and correct it to keep appropriate levels. It’s critical that you trust your dealership with accurate diagnosis and repair of your car. Only utilize genuine or authorized re-manufactured replacement components precisely made for your vehicle.
Additives and Chemicals
We don’t recommend using chemicals or additives that aren’t authorized by us as part of your vehicle’s regular maintenance. Please check to see if your warranty covers it.
Oils, Fluids, and Flushing
Fluid discoloration, in and of itself, is often a typical operating attribute that does not necessarily signal the need for fluid replacement. Fluid stains should be examined as soon as possible if they exhibit signs of overheating or contamination by foreign material.
Make sure the vehicle’s oils and fluids are changed at the recommended intervals, or as part of a repair. Flushing is an acceptable method to replace the fluid for several car subsystems during scheduled maintenance. It is critical that systems be flushed with only new fluid that matches the system’s requirements and operates it, or using our approved flushing chemical.
Last update on 2023-09-28 / Affiliate links / Images from Amazon Product Advertising API