The best motor oil for Chrysler Pacifica is a tough question, as there are many factors that go into determining the best engine oil. This blog post will compare and contrast some of the best motor oils on the market to help you make an informed decision about what’s best for your car!
Motor oil is an important part of the performance and life expectancy of your vehicle. If you want to know which motor oil best suits your Chrysler Pacifica, read on!
There are several different types of motor oils: conventional, synthetic blend, and full synthetic. Conventional oils are best for those who want a lower-cost alternative that still performs well. Synthetic blend oils provide some advantages over both synthetics and conventional oils such as increased fuel economy and extended engine life. Full synthetics offer even more benefits than just better fuel economy because they can withstand high temperatures better than other types of oil. The best type for you will depend on what kind of driving habits you have as well as your budget!
How Much Oil Does a Chrysler Pacifica Take?
The amount of oil you should use varies depending on the sort of car, engine size, and type of oil. A filter is required for 5 quarts of 0W-20 oil in a new Chrysler Pacifica. Engine sludge can be reduced, as well as wear in older engines, by using high-mileage oil. Before it starts, you may help prevent this issue by maintaining up with your oil changes.
Use API Certified SAE 0W-20 Engine Oil, which meets the manufacturer’s Material Standard MS-6395 and is used by Mopar®, Pennzoil, and Shell Helix. Check your engine oil filler cap for the correct SAE grade.
For conventional oil, Chrysler recommends getting your 2021 Chrysler Pacifica’s oil and filter changed every 3,000-5,000 miles. Synthetic oil should be replaced at least once every 7,500 to 10,000 kilometers. Keep in mind that it’s vital to check your owner’s handbook and with your dealer to discover the intervals that are ideal for your vehicle.
2017 2018 2019 2020 Chrysler Pacifica Engine Oil Capacity
2017-2020 Chrysler Pacifica Engine Oil Capacity
3.6L 6-cyl G ERF Flex engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
3.6L 6-cyl G ERC engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
3.6L 6-cyl ERC Flex engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
3.6L 6-cyl EH3 engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
2021 2022 Chrysler Pacifica Engine Oil Capacity
2021 2022 Chrysler Pacifica Engine Oil Capacity
3.6L 6-cyl G ERC engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
3.6L 6-cyl ERC Flex engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
3.6L 6-cyl EH3 engine:
- Engine Oil Capacity with filter: 5 quarts (4.7 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 20 ft/lbs.
Chrysler Pacifica 0W-20 Oil
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changesm,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Superior wear protection on critical engine parts
- 6X better wear protection than industry standards, as measured in the latest Sequence IVA test
- Superior sludge cleaning and protection against new formation
- 1.3X better sludge protection than industry standards, as measured in Sequence VH sludge test vs. API SP limits
- Full synthetic formula provides thermal and oxidation stability
- PREMIUM FULL SYNTHETIC: K&N premium synthetic oil helps keep your engine running like new.
- ADVANCED SYNTHAMAX TECHNOLOGY: Formulated with unique additives to help protect critical engine components.
- SUPERIOR ENGINE PROTECTION: Advanced formula full synthetic oil is formulated to minimize harmful contaminants and sludge buildup.
- REDUCE WEAR & TEAR: K&N ultra synthetic engine oil offers premium engine protection.
- ALL WEATHER PROTECTION: K&N advanced full synthetic motor oil helps your car run smooth in both cold & hot temperature conditions.
- Ultimate protection against wear, friction, heat and deposits, the main reasons for engine breakdown
- 24x stronger protection against engine-killing contaminants than the industry-leading full synthetic
- Dual Defense Additive Technology helps keep your engine clean and running at peak performance for optimal fuel economy and performance
- 10X stronger against oil breakdown and 50% greater wear protection than industry standards
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, dexos 1 Gen 3
- Castrol Eco Pack is an environmentally conscious packaging solution with 70% less plastic than a standard 5 quart jug and the outer corrugate shell that is completely recyclable
- Our NEW Eco Pack is filled with Castrol EDGE which is now certified carbon neutral in compliance with PAS2061
- Castrol EDGE Full Synthetic Motor Oil with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance.
- 6X better wear protection than required by the latest Sequence IVA test limits and 10X Better High Temperature performance as measured in Sequence IIIH engine test vs. API SP test limit
- Specifications - 0W-20: API SP/SN PLUS/SN, ILSAC GF-6, ACEA A1/B1, ACEA C5, GM Dexos 1 Gen 2, Meets Ford WSS-M2C947-B1, Meets Ford WSS-M2C962-A1, Meets engine test requirements of Chrysler MS 6395
- The first motor oil to actively restore engine cleanliness and protect against future damage
- With continuous use, Valvoline Active Clean Technology removes up to 100% of deposits while Liqui-Shield Technology helps prevent future deposits (*with regular oil changes. In Adapted Sequence IIIH Testing: Piston Deposit Removal)
- 79% stronger anti-wear protection than industry standards (vs. GF-6 qualified oil)
- Minimizes friction between metal surfaces in your engine to help improve fuel economy
- The best motor oil for any age vehicle, from your new car’s first oil change to high-mileage vehicles
- 3X Stronger against viscosity breakdown than leading full synthetic* - *Viscosity breakdown as measured in Kurt Orbahn test on 5W-30
- 10X Better high stress performance** - **As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- 20,000 miles between oil changes*** - ***Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds ILSAC GF-5, API SN, ACEA A1, ACEA B1
- PREMIUM FULL SYNTHETIC: K&N premium synthetic oil helps keep your engine running like new.
- ADVANCED SYNTHAMAX TECHNOLOGY: Formulated with unique additives to help protect critical engine components.
- SUPERIOR ENGINE PROTECTION: Advanced formula full synthetic oil is formulated to minimize harmful contaminants and sludge buildup.
- REDUCE WEAR & TEAR: K&N ultra synthetic engine oil offers premium engine protection.
- ALL WEATHER PROTECTION: K&N advanced full synthetic motor oil helps your car run smooth in both cold & hot temperature conditions.
Recommended Engine Oil Filter For Chrysler Pacifica
At each engine oil change, the engine oil filter should be replaced with a new filter. For replacement, use a full-flow type disposable oil filter. Replacement filters of varying quality are available. Only high-quality Mopar® certified filters should be used.
- No Batteries Required
- Product Type: Oil Filter
- Product Type:Oil Filter
- The Package Length of the Product is 5.8 centimeters
- The Package Width of the Product is 6.7 centimeters
- The Package Height of the Product is 14.6 centimeters
- Country of Origin: UNITED STATES
- Fit type: Vehicle Specific
- Package Dimensions: 9.144 H x 8.128 L x 8.128 W (centimeters)
- Country of Origin : China
- Package Weight: 0.222 kilograms
- Fit type: Vehicle Specific
- Package Weight : 1.6 pounds
- Country of Origin : United States
- Package Dimensions: 10.16 L x 10.414 H x 10.414 W (centimeters)
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- Mopar OEM part that fits your specific vehicle
- FILTER ENGINE OIL
- Part Number: 68191349AB
- Manufactured to meet specifications for fit, form, and function
Last update on 2025-01-23 / Affiliate links / Images from Amazon Product Advertising API
