The best motor oil for Volkswagen Golf is not what you might think it is. The best motor oil for your VW Golf will depend on the climate that you live in, how many miles per day that you drive, and other factors like how often you change or flush your engine.
Motor oils are key to keeping engines running smoothly. Without an adequate supply of lubrication, the moving parts inside of an engine would grind together until they break down entirely. This leads to a lot of different problems with fuel economy and emissions control systems as well as lower performance which could lead to costly repairs later on down the line if not dealt with quickly enough.
How Much Oil Does a VW Golf Take?
The 1.8L Volkswagen Golf takes 5.8 quarts of 5W-40 oil. The 1.4L Volkswagen Golf takes 4.2 quarts of 0W-20 oil.
Use authorized oil that exactly follows the VW oil quality standard for your car’s engine, according to Volkswagen. Synthetic oils fulfill this requirement, although not all synthetic oils do. Make sure you’re using a genuine one that meets the rigorous requirements specified for your vehicle’s engine.
2015 2016 2017 2018 2019 2020 2021 Volkswagen Golf Engine Oil Capacity
2019-2021 Volkswagen Golf Engine Oil Capacity
1.4L 4-cyl DGXA Turbo engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
You can add a maximum of 0.5 liters (0.5 qt) of engine oil that meets the ACEA A3/B4 and API SN standard has a viscosity grade of SAE 0W-20 and is free from detergents or other additives. Injecting an engine with one that has a different viscosity grade than SAE 0W-20 will cause emissions and fuel consumption to rise. Only do it as a last resort. - Oil Type: 0W-20, 0W-30, 5W-40;
- Oil pan drain plug tightening torque: 22 ft/lbs.
1.8L 4-cyl CXBB Turbo engine:
- Engine Oil Capacity with filter: 5.8 quarts (5.5 liters);
If you live in an area where only synthetic oil that meets the appropriate Audi, Volkswagen oil quality standard at the recommended viscosity grade is available, be sure to select a viscosity grade that is suitable for the climate, season and usage conditions where the car will be utilized. Make sure the oil meets the requirements listed by Audi, Volkswagen. - Oil Type: 5W-40, 5W-30;
- Oil pan drain plug tightening torque: Steel – 22 ft/lbs. To remove the plastic oil drain plug, twist it by hand to loosen it and oil the O-ring. Tighten all the way till seated with an O-ring coated in oil.
1.8L 4 -cyl CXBA Turbo engine:
- Engine Oil Capacity with filter: 5.8 quarts (5.5 liters);
If you live in an area where only synthetic oil that meets the appropriate Audi, Volkswagen oil quality standard at the recommended viscosity grade is available, be sure to select a viscosity grade that is suitable for the climate, season and usage conditions where the car will be utilized. Make sure the oil meets the requirements listed by Audi, Volkswagen. - Oil Type: 5W-40, 5W-30;
- Oil pan drain plug tightening torque: Steel – 22 ft/lbs. To remove the plastic oil drain plug, twist it by hand to loosen it and oil the O-ring. Tighten all the way till seated with an O-ring coated in oil.
2010 2011 2012 2013 2014 Volkswagen Golf Engine Oil Capacity
2012-2018 Volkswagen Golf Engine Oil Capacity
2.0L 4-cyl CJAA Diesel Turbo engine:
- Engine Oil Capacity with filter: 4.5 quarts (4.3 liters);
- Oil Type: 5W-30;
- Oil pan drain plug tightening torque: Steel – 22 ft/lbs. After each removal, replace the drain plug with a new one.
2.5L 5-cyl Engine CBTA engine:
- Engine Oil Capacity with filter: 6.3 quarts (6 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs. After each removal, replace the drain plug with a new one.
2.5L 5-cyl Engine CBUA engine:
- Engine Oil Capacity with filter: 6.3 quarts (6 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs. After each removal, replace the drain plug with a new one.
1998 1999 2000 2001 2002 2003 2004 2005 2006 Volkswagen Golf Engine Oil Capacity
1998-2006 Volkswagen Golf Engine Oil Capacity
1.8L 4-cyl AWP Turbo engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
1.8L 4-cyl AWD Turbo engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
1.8L 4-cyl AWW Turbo engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
1.9L 4-cyl BEW Diesel Turbo engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
1.9L 4-cyl ALH Diesel Turbo engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.0L 4-cyl BEV engine:
- Engine Oil Capacity with filter: 4.4 quarts (4.2 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.0L 4-cyl AZG engine:
- Engine Oil Capacity with filter: 4.4 quarts (4.2 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.0L 4-cyl AVH engine:
- Engine Oil Capacity with filter: 4.4 quarts (4.2 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.0L 4-cyl AEG engine:
- Engine Oil Capacity with filter: 4.4 quarts (4.2 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.8L 6-cyl BDF engine:
- Engine Oil Capacity with filter: 5.8 quarts (5.5 liters);
If your area does not have synthetic oil that meets the required Audi, Volkswagen oil quality standard and recommends a viscosity grade, use a viscosity grade appropriate for the climate, season, and operating conditions where the car is used. Make sure the oil satisfies the Audi, Volkswagen oil quality requirements listed. - Oil Type: 5W-40, 5W-30;
Add 0.5L (0.5qt) less than the capacity indicated, start the engine, let run until operating temperature is about 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as shown on the dipstick. Depending on the model, this may be more or less than 0.5 L (0.5 qt). - Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.8L 6-cyl AFP engine:
- Engine Oil Capacity with filter: 6.1 quarts (5.8 liters);
- Oil Type: 5W-40, 5W-30;
- Oil pan drain plug tightening torque: 22 ft/lbs.
1993 1994 1995 1996 1997 Volkswagen Golf Engine Oil Capacity
1993-1997 Volkswagen Golf Engine Oil Capacity
1.8L 4-cyl ACC engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
- Oil Type: 5W-40, 5W-30, 10W-30, 10W-40, 5W-50, 10W-50, 10W-60;
- Oil pan drain plug tightening torque: 22 ft/lbs.
1.9L 4-cyl ALH Diesel Turbo engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
- Oil Type: 5W-30, 5W-40, 10W-30, 10W-40;
- Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.0L 4-cyl engine:
- Engine Oil Capacity with filter: 4.2 quarts (4.2 liters);
- Oil Type: 5W-30, 5W-40, 10W-30, 10W-40;
- Oil pan drain plug tightening torque: Steel – 22 ft/lbs.
2.8L 6-cyl AAA engine:
- Engine Oil Capacity with filter: 5.8 quarts (5.5 liters);
- Oil Type: 5W-40, 5W-30, 10W-30, 10W-40, 5W-50, 10W-50, 10W-60;
- Oil pan drain plug tightening torque: 22 ft/lbs.
1985 1986 1987 1988 1989 1990 1991 1992 Volkswagen Golf Engine Oil Capacity
1985-1992 Volkswagen Golf Engine Oil Capacity
1.6L 4-cyl ME Diesel engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
- Oil Type: 20W-20;
- Oil pan drain plug tightening torque: 22 ft/lbs.
1.8L 4-cyl PF engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
- Oil Type: 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, 15W-50, 20W-20;
- Oil pan drain plug tightening torque: 22 ft/lbs.
2.0L 4-cyl 9A engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
- Oil Type: 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, 15W-50, 20W-20;
- Oil pan drain plug tightening torque: 22 ft/lbs.
2.0L 4-cyl 9A engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
- Oil Type: 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, 15W-50, 20W-20;
- Oil pan drain plug tightening torque: 22 ft/lbs.
Volkswagen Golf 0W-20 Oil
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SN Plus, ACEA C5, MB 229.71, VW 50800/50900 & TL52577, BMW LL-17FE+, Porsche c20, Volvo VCC-RBSO-2AE, STJLR.51.5122 and STJLR.06.5010
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against water intrusion than the industry-leading synthetic motor oil — it fights rust, corrosion, and other threats to help maximize vehicle life
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changesm,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | GM dexos1 Gen 3 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
Volkswagen Golf 0W-30 Oil
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-30 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changes,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Genuine Volkswagen OEM Full Synthetic Engine Oil
- Part number: G0550301QDSP
- 42 percent better rating on fighting power robbing deposits
- Superior engine protection versus conventional and synthetic blend oils
- Superior performance against deposits, wear and oxidation
- Meets BMW Longlife 01, GM-LL-A-025, GM-LL-B-025, Mercedes Benz 229.1, 229.3, 229.5, Volkswagen 505.00, 502.00
- Exceeds API SL, ACEA A3, ACEA B3, ACEA B4
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- Full synthetic 0W-30 motor oil that is made with natural gas and designed to maximize engine protection
- Formulated for high-performance diesel and gasoline engines in European vehicles, including Fiat, BMW, Mercedes-Benz, Porsche, and VW
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed*
- Delivers faster low-temperature oil flow and protection in extreme heat
- Protects horsepower and keeps engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40)
Volkswagen Golf 5W-20 Oil
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Full synthetic formula is engineered with Enhanced MaxLife Technology to prevent engine breakdown in vehicles with over 75,000 miles
- Formulated with seal conditioners to prevent and treat oil leaks, Valvoline Full Synthetic High Mileage minimizes oil consumption and maximizes engine life
- 50% better wear protection than the industry standard and 25% extra defense against deposits, sludge, corrosion and rust
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- American made and formulated, from the Original Motor Oil brand trusted for more than 150 years
- Mobil 1 High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
Volkswagen Golf 5W-30 Oil
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SP, ACEA C3, MB-Approval 229.52, MB-Approval 229.51, MB-Approval 229.31, MB 229.5, MB 229.3, MB 226.5, Approved under VW Standard 504.00/507.00, VW 502.00/505.00, VW 505.01, BMW LL-01, BMW LL-04, Porsche C30, Opel/Vauxhall OV0401547, Chrysler MS-13340
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Mobil 1 advanced full-synthetic motor oil 5W-30 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 5W-30 formula offers 24X stronger protection against water intrusion than the industry-leading synthetic motor oil — it fights rust, corrosion, and other threats to help maximize vehicle life
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
Volkswagen Golf 5W-40 Oil
- Advanced protection for European gasoline and diesel vehicles against the four main causes of engine breakdown: wear friction heat and deposits
- Formulated with top-quality anti-wear additives that go beyond industry and OEM standards in European vehicles
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
- Meets or exceeds all requirements of API SP, ACEA A3/B3, A3/B4, MB-Approval 229.5, MB-Approval 229.3, MB-Approval 226.5, Approved under VW Standard 502.00/505.00, VW 505.01, BMW LL-01, BMW LL-14FE+, Porsche A40, Renault RN0700 & RN0710, PSA B71 2296, Chrysler MS-12633, Chrysler MS-10725
- Advanced protection for European vehicles against the four main causes of engine breakdown: wear, friction, heat and deposits
- Engineered with high-quality oil additives and full synthetic base oils for the unique specifications and requirements of gasoline and diesel engines in VW, BMW, Mercedes-Benz, Audi, Porsche and more
- Superior high/low temperature protection to defend engines in extreme driving conditions and climates
- Premium antioxidants and cleaning detergents combine to safeguard against damaging deposits
- Meets or exceeds all requirements of API SP, ACEA A3/B3, A3/B4, MB-Approval 229.5, MB-Approval 229.3, MB-Approval 226.5, Approved under VW Standard 502.00/505.00, VW 505.01, BMW LL-01, BMW LL-14FE+, Porsche A40, Renault RN0700 & RN0710, PSA B71 2296, Chrysler MS-12633, Chrysler MS-10725
- Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
- Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes*
- Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
- Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
- 1.2X Better viscosity control to help engines run better for longer*
- 2X Better engine cleanliness to help maximize engine performance*
- As measured in DV6 test vs. test limit
- Approved and licensed specifications: ACEA A3/B4 and API SP
- BMW Longlife-01
- Rapid oil delivery at low temperatures, high lubrication reliability at high and low temperatures
- Long engine service life due to high level of protection against wear, mixable and compatible with commercially-available engine oils
- Outstanding engine cleanliness, tested with catalytic converters and performance proved with turbochargers
- Saves fuel and reduces pollutant emission; Optimum oil pressure at all engine speeds, high shear and ageing stability
- Approvals from vehicle manufacturers for Leichtlauf High Tech 5W-40 include BMW Longlife-01, MB-Approval 229.5, Porsche A40, Renault RN 0700, 0710, VW 502 00/505 00
Volkswagen Golf 10W-30 Oil
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 10W-30 formula offers 24X stronger protection against water intrusion than the industry-leading synthetic motor oil — it fights rust, corrosion, and other threats to help maximize vehicle life
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- 10W-30 motor oil formulated to keep engines clean and responsive
- Provides proven wear protection (based on Sequence IVA wear test using SAE 5W-30)
- Helps prevent dirt and contaminants from turning into performance-robbing deposits
- Compatible with engine seals and all conventional oils
- Suitable for all car, SUV, light van, and truck gasoline engines under all driving conditions
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 10W-30 formula offers 24X stronger protection against water intrusion than the industry-leading synthetic motor oil — it fights rust, corrosion, and other threats to help maximize vehicle life
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Full synthetic formula is engineered with Enhanced MaxLife Technology to prevent engine breakdown in vehicles with over 75,000 miles
- Formulated with seal conditioners to prevent and treat oil leaks, Valvoline Full Synthetic High Mileage minimizes oil consumption and maximizes engine life
- 50% better wear protection than the industry standard and 25% extra defense against deposits, sludge, corrosion and rust
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- American made and formulated, from the Original Motor Oil brand trusted for more than 150 years
Volkswagen Golf Engine Oil Filter
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- Item Package Dimension: 6.61L x 4.05W x 3.30H inches
- Item Package Weight - 0.88 Pounds
- Item Package Quantity - 1
- Product Type - OIL FILTER
- VEHICLE COMPATIBILITY: for Volkswagen Beetle Coupe Beetle Convertible 2012-2018 (WITH Engine Codes CPLA CPPA CPRA CPKA ), for Volkswagen Golf 2015 (WITH Engine Code CXDA), for Volkswagen Golf Sportwagen 2015-2018 (WITH Engine Codes CXBA CXBB), for Volkswagen Jetta SEDAN 2011-2018 (WITH Engine Codes CPLA CPPA CPRA CPKA), for Volkswagen Passat 2012-2018 (WITH Engine Codes CPRA CPKA), for Turbo Engines 1.8L 2.0L.
- PRODUCT INFORMATION: Size: 11.3x5.2cm / 4.45"x2.05"(H*D); Three layers filter paper, results in higher efficiency at 5 micron, effectively separate oil and water, protects your vehicle's fuel system from dust.
- OE Number:06L115562.
- DIRECT INSTALL: Direct replace the broken Engine Oil Filter.
- PACKAGE LIST: 1 Set Engine Oil Filter.
- LONG LIFE DESIGN: Up to 20,000 mile engine protection. Follow your manufacturers change intervals
- HIGH FILTERATION EFFICIENCY: Captures 99% of contaminate greater than 30 micron
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic oil, conventional oil, high mileage and synthetic blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- PREMIUM PERFORMANCE: Laboratory tested to ensure excellent filtration and premium quality
- COMPATIBLE with Volkswagen Passat 1.8L 2014-2017, Tiguan 2.0L 2018-2021, Jetta 1.8L 2014-2018, GTI 2.0L 2015-2021, Passat 2.0L 2018-2021, Beetle 1.8L 2014-2017, Beetle 2.0L 2013-2019, Jetta 2.0L 2013-2021, Golf 1.8L 2015-2018
- [cont.] Golf SportWagen 1.8L 2015-2019, Golf R 2.0L 2015-2019, Atlas 2.0L 2018-2021, Atlas Cross Sport 2.0L 2020-2021, Arteon 2.0L 2019-2021 | Audi Q5 2.0L 2018-2021, A4 Quattro 2.0L 2017-2020, A3 Quattro 2.0L 2015-2020, A4 2.0L 2017-2020
- REPLACES VW / AUDI 06K 115 562, WIX WL10396
- OPTIMIZED TO FILTER SYNTHETIC OILS. Designed to maintain performance for the longer oil change intervals on vehicle engines using synthetic oil.
- BUILT TO PROVIDE LONG-LASTING ENGINE PROTECTION with 2X the filtration capacity compared to conventional oil filters. Proven to drive up to 10,000 miles between oil changes with confidence.
- SUPERIOR ENGINE PROTECTION: Designed for severe driving conditions including stop-and-go traffic, towing, and dusty environments
- 99% DIRT TRAPPING EFFICIENCY: Advanced blended media captures microscopic particles with 99% efficiency at 26 microns, helping extend engine life and maintain peak performance (Tested on WIX 51515)
- EXTENDED SERVICE LIFE: Meets or exceeds OE recommended change intervals, lasting up to 15,000 miles
- TOOL-FREE, EFFICIENT DESIGN: Top-mounted cartridge with precision-fit sealing components allows for easy, tool-free installation; Reduces impact by replacing only the filter element, not the entire housing
- COMPATIBILITY NOTE: Verify vehicle fitment by entering vehicle information in the part finder stripe to ensure this is the correct filter for your vehicle
- MANN-FILTER Oil Filter HU 6013 z / Oil filter set with gasket / gasket set / Dimensions (mm): / Premium Filter in original equipment quality
- MANN-FILTER oil filter elements not only offer the highest filtration performance, but also protect the engine through excellent oil cleaning
- Optimum protection and sealing over the entire maintenance interval - due partly to the filter medium specially adapted to the intended use/ Metal-free and fully incinerable
- Looking to find the correct filter? Select: brand, model, vehicle type, and engine type above to see which one fits your vehicle
- MANN+HUMMEL complies with REACH-regulation + supports the goal of Improved Health and Safety through the design, manufacturing, usage, disposal and recycling of our products
- Single Quantity
- No Core Charge Req.
- Weight: 0.77lbs
- Each MANN-FILTER Spin-On Oil Filter is engineered to meet the highest filtration requirements of European automotive nameplates, delivering perfect service mile after mile
- The filter media in every MANN-FILTER part remains stable and functional even under extreme conditions
- Valves adapted to the respective engine, such as return stop valves or PTFE-coated bypass valves, ensure a reliable oil supply
- Thanks to its spring steel design, the flexible element guide of MANN-FILTER parts holds the element in the proper position radially and axially
- Compatible with select models from Audi Volkswagen
- COMPATIBLE with Volkswagen Jetta 2.5L 2005-2014, Beetle 2.5L 2006-2014, Passat 2.5L 2012-2014, Passat 2.0L 2006-2008, Rabbit 2.5L 2006-2009, Golf 2.5L 2010-2014, GTI 2.0L 2006-2008, Eos 2.0L 2007-2009, Jetta 2.0L 2006-2008
- [cont.] S40 2.4L 2004-2010, C70 2.5L 2006-2013, C30 2.5L 2007-2013, S40 2.5L 2004-2011, XC60 2.5L 2015-2016, V50 2.4L 2005-2010, V50 2.5L 2005-2011, XC70 2.5L 2016, V60 Cross Country 2.5L 2015-2016, V60 2.5L 2015-2016, S60 Cross Country 2.5L 2016
- REPLACES ACDELCO PF2257, FRAM CH9911, CH9954, PUROLATOR L35234, L35581, VOLVO 8642570, 8692305, VW / AUDI 06D 115 405, 06D 115 466, 06D 115 562, 06D 198 405, WIX 57186, 57187
- BUILT for both SYNTHETIC AND CONVENTIONAL OILS. Proven to drive up to 5,000 miles between oil changes with confidence.
- GREATER ENGINE PROTECTION by optimally screening out 97% of harmful contaminants such as such as carbon, sand, dust and bits of metal before they can get into your engine.
Last update on 2025-12-13 / Affiliate links / Images from Amazon Product Advertising API




















