If you’re the proud owner of a Kia Cadenza, then you know that you need to use the best motor oil if you want to keep your car running in top condition. But with so many different types of motor oil on the market, it can be difficult to figure out which one is right for your car. In this article, we will discuss the best motor oil for Kia Cadenza and help you make the best decision for your vehicle.
How Much Oil Does a Kia Cadenza Take?
3.3L Kia Cadenza takes 6.9 quarts of 5W-30 oil with a filter.
It is suggested to utilize a viscosity grade SAE 5W-30 (API Service SM / ILSAC GF-4 / ACEA A5) engine oil for improved fuel efficiency. If your country does not sell engine oil, consult the viscosity chart to choose the appropriate engine oil.
Technically, your Kia can function properly with regular or traditional oil. This is the most basic form of oil and isn’t filtered very much. This also means that it won’t function as well as synthetic oil.
Always check or drain any lubricant around the filler plug, drain plug, or dipstick before checking or draining it. This is especially vital in dusty or sandy locations and when driving on unpaved roads. Cleaning out the hole and dipstick areas will keep dirt and mud out of the engine and other components that might be damaged.
The viscosity of engine oil has an impact on fuel efficiency and cold-weather operation (engine start and engine oil flowability). Engine oils with a lower viscosity can improve fuel economy and performance in the winter, however, high-viscosity engines oils are required for optimal lubrication in the heat. Using oils with a viscosity other than that stated could result in engine damage.
Consider the variety of temperatures your car will be driven in before the next oil change when selecting an oil. Continue to choose the suggested oil viscosity from the chart.
Kia Cadenza 5W-30 Oil
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- Mobil Full Synthetic High Mileage 5W-30 motor oil is designed for vehicles with over 75,000 miles, upgrading from a conventional or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent oil leaks, sludge, and deposit formation to help reduce engine wear with a balanced additive system formulation and extra seal conditioner
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
- REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
- REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
- ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- PROVEN TO MINIMIZE EVERYDAY WEAR on your engine by providing consistent lubrication and defense
- OPTIMIZE POWER & FUEL EFFICIENCY with our low friction technology
- RESIST OIL BREAKDOWN & SLUDGE with added detergents to keep your engine clean
- EXCEPTIONAL TEMPERATURE PROTECTION defends your engine in even the most severe weather
- REDUCE COSTLY REPAIRS by protecting critical engine components
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SL, ACEA A3/B3, A3/B4 & A5/B5, MB 229.5, 229.3 & 226.5, VW 50200/50500 & 50501, BMW LL-01 & LL-14FE+, and Renault RN0700 & RN0710
- Full synthetic 5W-30 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
Kia Cadenza 10W-30 Oil
- ENHANCED MAXLIFE TECHNOLOGY PREVENTS engine breakdown in extreme conditions with 50% better wear protection than the industry standard
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- Conventional 10W-30 engine oil formula that keeps engines clean and responsive
- No leading conventional oil provides better wear protection (based on Sequence IVA wear test using SAE 5W-30).
- Helps prevent sludge and other damaging deposits (based on Seq VH Sludge Test)
- Compatible with engine seals and all conventional oils
- Suitable for all car, SUV, light van, and truck gasoline engines under all driving conditions (For vehicles calling for ILSAC GF-6A, API SP-RC and all previous categories; Chrysler MS-6395)
- Full synthetic 10W-30 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
- Enhanced fuel economy capability of up to 2%* without compromising engine protection
- Extreme temperature protection for more uptime in extreme conditions; ideal for locations with large ambient temperature ranges
- Improved cold start performance so that oil reaches critical engine parts faster in cold weather
- Exceptional wear protection for longer life in a wide range of heavy-duty engine applications—from pickup trucks to tractors to semi rigs
- Conventional High Mileage 10W-30 engine oil specially formulated to help stop leaks and reduced oil consumption in worn engines
- Recommended for vehicles with over 75,000 miles
- Helps prevent sludge and other damaging deposits
- Provides proven wear protection for engine parts
- Exceeds the requirements of the following industry specifications: API SP-RC and all previous categories; ILSAC GF-6A
- Proven To Minimize Everyday Wear On Your Engine By Providing Consistent Lubrication And Defense
- Optimize Power & Fuel Efficiency With Our Low Friction Technology
- Resist Oil Breakdown & Sludge With Added Detergents To Keep Your Engine Clean
- Exceptional Temperature Protection Defends Your Engine In Even The Most Severe Weather
Kia Cadenza 5W-40 Oil
- ADVANCED PROTECTION IN EUROPEAN VEHICLES agains the four main causes of engine breakdown: wear friction heat and deposits
- EXTRA WEAR PROTECTION vs. industry and OEM standards with advanced anti-wear additives
- SUPERIOR PERFORMANCE FOR EUROPEAN gasoline and diesel engines
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your engine no matter the climate or driving conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of API SN, ACEA A3/B3, A3/B4, MB 229.5, 229.3, & 226.5, VW 50200/50500 & 50501, BMW LL-01 & LL-14FE plus, Porche A40, Renault RN0700 & RN0710, PSA B71 2296, and Chrysler MS-12633/ MS-10725
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- Designed for complete protection for modern light-duty diesel and high-performance engines in European vehicles
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Nothing keeps your engine closer to factory clean (based on Sequence VH and M-111 sludge test)
- No other leading motor oil provides better protection from friction (based on Sequence IVA wear test)
- Provides better fuel economy (meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry standard gasoline engines)
- Specifications: API CF/SN, ACEA A3/B4, BMW Longlife-01, MB Approval 229.3/229.5, Porsche A40, Renault RN 0700/0710, VW 502 00/505 00
- Castrol EDGE Euro Car product range has been optimized to meet the stringent requirements of the various European Automobile Manufacturers Association or ACEA oil sequences. These standards can apply to both gasoline and diesel powered engines and are often more demanding than ILSAC/API requirements.
- Castrol EDGE Euro Car fluids are engineered with Fluid TITANIUM Technology to transform under pressure, increasing its film strength to prevent oil breakdown, reduce friction and have been optimized to deliver up to 40% better performance* against ACEA standards to unlock maximum engine performance.
- Superior engine protection versus conventional and synthetic blend oils
- Superior performance against deposits, wear and oxidation
2017 2018 2019 2020 Kia Cadenza Engine Oil Capacity
2017-2022 Kia Cadenza Engine Oil Capacity
3.3L 6-cyl engine:
- Engine Oil Capacity with filter: 6.9 quarts (6.5 liters);
- Oil Type: 5W-30, 10W-30;
- Oil pan drain plug tightening torque: 25-33 ft/lbs.
2014 2015 2016 Kia Cadenza Engine Oil Capacity
2014-2016 Kia Cadenza Engine Oil Capacity
3.3L 6-cyl engine:
- Engine Oil Capacity with filter: 6 quarts (5.7 liters);
- Oil Type: 5W-30, 5W-40, 10W-30;
- Oil pan drain plug tightening torque: 25-33 ft/lbs.
Recommended Engine Oil Filter For Kia Cadenza
The engine oil and filter should be changed according to the maintenance schedule. If the car is being driven in severe weather, more frequent oil and filter replacements are necessary.
- Genuine OEM Factory Part in Original Retail Packaging
- OEM quality & Direct fitment Guaranteed
- Exact part that came with your vehicle and selling on dealership
- Fit for AZERA / GRANDEUR 11-14 and more
- Interchangeable Part Number: 263003CAB0
- Ideal replacement - this engine oil filter cover is a direct replacement for the original equipment filter cover
- Durable construction - this part is specifically designed to withstand extreme underhood temperatures to resist cracking and leaking
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- Easy to install - no special tools required
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- COMPATIBLE with Kia Sorento 3. 3L 2014-2018, Sorento 3. 5L 2011-2013, Sedona 3. 3L 2015-2018, Sedona 3. 5L 2011-2014, Cadenza 3. 3L 2014-2016 | Hyundai Santa Fe 3. 3L 2013-2018, Santa Fe 3. 5L 2010-2012, Santa Fe XL 3. 3L 2013-2019, Azera 3. 3L 2012-2017
- REPLACES HYUNDAI 26320-3CAA0-S
- OPTIMIZED TO FILTER SYNTHETIC OILS. Designed to maintain performance for the longer oil change intervals on vehicle engines using synthetic oil.
- BUILT TO PROVIDE LONG-LASTING ENGINE PROTECTION with 2X the filtration capacity compared to conventional oil filters. Proven to drive up to 10, 000 miles between oil changes with confidence.
- GREATER ENGINE PROTECTION screens out 99% of harmful engine contaminants such as carbon, sand, dust, and bits of metal before they enter your engine. Silicone anti-drain back valve helps oil lubricate the engine during starts, avoiding dry starts.
Last update on 2024-03-07 / Affiliate links / Images from Amazon Product Advertising API