If you’re the owner of a Toyota C-HR, then you know that it’s important to keep your vehicle well-maintained. One of the most important aspects of maintenance is using the best motor oil for your car. There are many different types of motor oil available on the market, so it can be difficult to determine which one is right for your vehicle.
When it comes to choosing the best motor oil for your Toyota C-HR, there are a few factors you need to take into account. The type of engine in your car, the climate you live in, and your driving habits all play a role in determining which oil is best for your vehicle. In this article, we will discuss the best motor oil for Toyota C-HR vehicles and provide some recommendations based on our findings.
What Kind Of Oil Does A Toyota C-HR Take?
The correct viscosity oil for a 4-cyl engine is 0W-20 ILSAC GF-5 multigrade engine oil, which offers both excellent fuel efficiency and starting in the winter. If 5W-20 isn’t accessible, 0W-20 may be used. However, it must be changed with 0W-20 at the next oil change.
How Much Oil Does A Toyota C-HR Take?
New Toyota C-HR takes 4.4 quarts of 0W-20 synthetic oil with a filter. The 0W in 0W-20 stands for the oil’s cold startability. Oil with a lower number before the W is easier to start in the winter. The Engine Oil Capacity is a figure that should be used when filling the engine with oil. Allow more than 5 minutes for the engine to warm up and then turn it off, and check the oil level on the dipstick after.
2018 2019 2020 2021 2022 Toyota C-HR Engine Oil Capacity
2018-2022 Toyota C-HR Engine Oil Capacity
2.0L 4-cyl 3ZR-FAE engine:
- Engine Oil Capacity with filter: 4.4 quarts (4.2 liters);
- Oil Type: 0W-20;
- Oil Drain Plug Torque: 27 ft/lbs.
Toyota C-HR 0W-20 Oil
- For new Toyota and Scion purchases, use 0W-20 oil for all oil changes
- With the new 0W-20 oil you only needchange your oil every 10,000 miles12 months, dependingoperating conditions
- Reduced environmental burdenrecycling and disposalwaste oil
- Enhanced engine protectiona wide varietyoperating temperatures
- For new Toyota and Scion purchases, use 0W-20 oil for all oil changes
- With the new 0W-20 oil you only needchange your oil every 10,000 miles12 months, dependingoperating conditions
- Reduced environmental burdenrecycling and disposalwaste oil
- Enhanced engine protection, wide variety operating temperatures
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changesm,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- And Vehicle Specific
- Manufacturer Warranty
- Toyota Quality Assured
- OEM, Not After Market
- Vehicle Specific
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Approved and Licensed Specifications: Exceeds API SP/SN PLUS/SN/SM |ILSAC GF-6 | GM dexos1 Gen 3 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade |**As measured in Seq IX test under high load/torque conditions vs. API SP test limits | ***Or one year, whichever comes first
Toyota C-HR Engine Oil Filter
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- Replacement for: 2018-2022 Toyota C-HR, 2017-2020 Toyota Prius Prime, 2017-2018 Toyota Corolla iM, 2016 Scion iM, 2014-2018 Toyota Corolla, 2014 Toyota Matrix, 2012-2018 Toyota Prius V, 2012-2015 Toyota Prius Plug-In, 2011-2017 Lexus CT200h, 2010-2020 Toyota Prius, 2009-2013 Toyota Corolla, Matrix (1.8L), 2009-2010 Pontiac Vibe (1.8L), 2008-2014 Scion xD
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
- Advanced engine protection
- Premium gasket included
- Anti-drain back valve holds a reserve of oil in the filter to help protect the engine during start-ups
- Bosch Workshop Engine Oil Filters screen up to 97.5% of harmful particles such as dirt, carbon deposits, and more from the engine oil, leading to stronger engine performance and greater longevity
- Capable of capturing and holding up to 13 grams of harmful particles, preventing them from circulating throughout your vehicles' engine, keeping it protected from premature wear
- Stronger steel baseplates and housings prevent warpage, leaks, and poor fit
- Synthetic rubber anti-drainback valve (where applicable) ensures a supply of clean oil is available when you start your vehicle, preventing wear producing dry starts
- Seals tightly yet removes easily thanks to high-lubricity synthetic rubber gasket design
Engine oil is an automobile fluid that comes with a variety of chemicals, many of which are harmful to the skin. To prevent long-term and frequent contact, avoid using used engine oil on your skin. Wash thoroughly with soap and water to remove used engine oil from your skin.
Last update on 2025-04-16 / Affiliate links / Images from Amazon Product Advertising API
