When it comes to choosing the best motor oil for your Mazda Miata, there are a few factors you need to consider. The type of driving you do, the age and make of your car, and even the climate in which you live all play a role in what type of oil is best for your vehicle.
That said, there are some general guidelines that can help you choose the right motor oil for your Miata. For example, if you drive your car mainly on short trips around town, then oil with a higher viscosity (thicker) would be best. This will help keep your engine lubricated during start-ups when the engine is cold.
How Much Oil Does a Mazda Miata Take?
2.0L Mazda MX-5 Miata takes 4.5 quarts of 0W-20 oil with a filter.
Your Mazda vehicle runs on pure oil from Mazda. Your vehicle requires genuine Mazda 0W-20 Oil to maximize fuel efficiency. For regular maintenance, use genuine Mazda components and Castrol (the U.S.A. only).
The International Lubricant Standardization and Approval Committee (ILSAC), which is made up of American and Japanese automobile firms, has certified this trademark symbol regarding engine and emission system protection standards and fuel economy requirements.
2015 2016 2017 2018 2019 2020 2021 2022 Mazda Miata Engine Oil Capacity
2015-2022 Mazda Miata Engine Oil Capacity
2.0L 4-cyl engine:
- Engine Oil Capacity with filter: 4.5 quarts (4.3 liters);
- Oil Type: 0W-20;
- Oil drain plug torque: 23-30 ft/lbs.
2006 2007 2008 2009 2010 2011 2012 2013 2014 Mazda Miata Engine Oil Capacity
2006-2014 Mazda Miata Engine Oil Capacity
2.0L 4-cyl P66MD engine:
- Engine Oil Capacity with filter: 4.8 quarts (4.5 liters);
- Oil Type: 0W-20, 5W-20;
- Oil drain plug torque: 23-30 ft/lbs.
2.0L 4-cyl SJ6M15 engine:
- Engine Oil Capacity with filter: 4.6 quarts (4.4 liters);
- Oil Type: 0W-20, 5W-20;
- Oil drain plug torque: 23-30 ft/lbs.
1999 2000 2001 2002 2003 2004 2005 Mazda Miata Engine Oil Capacity
1999-2005 Mazda Miata Engine Oil Capacity
1.8L 4-cyl 1839cc engine:
- Engine Oil Capacity with filter: 4 quarts (3.8 liters);
- Oil Type: 5W-20, 5W-30;
- Oil drain plug torque: 23-30 ft/lbs.
1.8L 4-cyl Turbo engine:
- Engine Oil Capacity with filter: 4 quarts (3.8 liters);
- Oil Type: 5W-20;
- Oil drain plug torque: 23-30 ft/lbs.
1.8L 4-cyl engine:
- Engine Oil Capacity with filter: 4 quarts (3.8 liters);
- Oil Type: 5W-20;
- Oil drain plug torque: 23-30 ft/lbs.
1989 1990 1991 1992 1993 1994 1995 1996 1997 Mazda Miata Engine Oil Capacity
1989-1997 Mazda Miata Engine Oil Capacity
1.8L 4-cyl 1839cc engine:
- Engine Oil Capacity with filter: 4 quarts (3.8 liters);
- Oil Type: 5W-30, 10W-30;
- Oil drain plug torque: 23-30 ft/lbs.
1.6L 4-cyl 1597cc engine:
- Engine Oil Capacity with filter: 3.6 quarts (3.4 liters);
- Oil Type: 5W-30, 10W-30;
- Oil drain plug torque: 22-30 ft/lbs.
Mazda Miata 0W-20 Oil
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- Mobil 1 Extended Performance full-synthetic motor oil 0W-20 helps protect critical engine parts for up to 20,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Approved and Licensed Specifications: Exceeds API SP/SN PLUS/SN/SM |ILSAC GF-6 | GM dexos1 Gen 3 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade |**As measured in Seq IX test under high load/torque conditions vs. API SP test limits | ***Or one year, whichever comes first
- Mobil 1 High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | GM dexos1 Gen 3 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
- Engine Oil
- MOLY ADDITIVE SPECIALLY DESIGNED FOR SKYACTIV ENGINE
- ORIGINAL MAZDA OIL USED IN EVERY MAZDA DEALERSHIP
- Fitment Type: Direct Replacement
Mazda Miata 5W-20 Oil
- Full synthetic formula is engineered with Enhanced MaxLife Technology to prevent engine breakdown in vehicles with over 75,000 miles
- Formulated with seal conditioners to prevent and treat oil leaks, Valvoline Full Synthetic High Mileage minimizes oil consumption and maximizes engine life
- 50% better wear protection than the industry standard and 25% extra defense against deposits, sludge, corrosion and rust
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- American made and formulated, from the Original Motor Oil brand trusted for more than 150 years
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.*
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- The information below is per-pack only
- Full synthetic 5W-20 engine oil made with natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology
- No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30)
- Helps protect engines from loss of power and provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine)
- Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30)
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1 |
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
Mazda Miata 5W-30 Oil
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.*
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- High Mileage 5W-30 synthetic blend engine oil specially formulated to help stop leaks and reduce oil consumption in worn engines
- Recommended for vehicles with more than 75,000 miles
- Helps prevent sludge and other damaging deposits
- Proven wear protection for engine parts
- Suitable for modern turbocharged engines where low-speed pre-ignition protection is required
Mazda Miata 10W-30 Oil
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 10W-30 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- 10W-30 motor oil formulated to keep engines clean and responsive
- Provides proven wear protection (based on Sequence IVA wear test using SAE 5W-30)
- Helps prevent dirt and contaminants from turning into performance-robbing deposits
- Compatible with engine seals and all conventional oils
- Suitable for all car, SUV, light van, and truck gasoline engines under all driving conditions
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6
- High Mileage 10W-30 engine oil specially formulated to help stop leaks and reduce oil consumption in worn engines
- Recommended for vehicles with more than 75,000 miles
- Helps prevent sludge and other damaging deposits
- Proven wear protection for engine parts
- Suitable for modern turbocharged engines where low-speed pre-ignition protection is required
Recommended Engine Oil Filter For Mazda Miata
- Exclusive FILTECH media technology screens out and holds on to up to 14 grams of dirt and particles, preventing it from circulating throughout your engine and causing damaging wear that can lead to engine failure
- OE fit ensured through strong steel base plates and housings that prevent warpage, leaks and poor fit
- Silicone anti-drain back valve ensures engine receives a supply of clean oil when the vehicle is started
- High lubricity gasket design provides a tight, leak proof seal, yet allows for easy removal when it's time for an oil change; Metal spiral-wound center tube reinforces internal strength for durability
- Compatible with select vehicles including, but not limited to, the following (Note: vehicle trim level/engine may affect fitment - verify specific vehicle fitment details with fit checker above): CHEVROLET: 15-18 City Express; HONDA: 00-06 Insight
- EASY INSTALLATION: Engine oil filter comes with Suregrip non-slip surface making it easy to remove and implement your filter without slippery mess ups. Perfect for the DIYer like yourself, just screw new filter on until gasket reaches base contact and tighten.
- DURABLE DUAL LAYER: Compare to standard oil filters, FRAM Ultra Synthetic provides 99%+ filtration efficiency with pleated media that entraps all kinds of dirt and exhaust for a cleaner output.
- SUPERIOR ENGINE PROTECTION: FRAM car oil filter is composed of a slick silicone anti-drainback valve, delivering superior start-up engine protection with up to 3X the hot oil resistance. Keep your filter clean without the dangerous mess.
- HIGH TEMP RESISTENCE: Filter combats high heat pressure for longer shelf life with advanced high nitrile gasket for extended durability and quality. Precision coil spring with glass-fiber-reinforced nylon poppet.
- 20,000 MILE CAPABILITY: Reliable for high mileage, FRAM Ultra Synthetic offers proven protection up to 20,000 miles. FRAM Ultra Synthetic delivers reliable performance for the person who lives on the road.
- ADVANCED ENGINE PERFORMANCE: Keep your engine clean for up to 15,000 miles thanks to high-density synthetic blend filter media; Expanded dirt-holding capacity captures over 99% of dirt; PurolatorONE gets the job done
- SYNTHETIC MEDIA: Made from high-density synthetic blend, these oil filters have long-lasting filtration capabilities, increasing time between oil changes and performance
- LEAK-PROOF SEAL: Thanks to the PTFE-Treated Gasket, you can rest easy knowing your engine is safe from leakage; It's heat resistant and flexible, and it's also easy to install and replace
- PROPER LUBRICATION: No dry starts—even after your vehicle has been sitting idle—thanks to the Silicone Anti-Drainback Valve; It keeps consistent oil flow and saves your engine from wear and tear during start-up, extending its lifespan
- DURABLE CONSTRUCTION: Wear-resistant metal end caps and the Double-Helix High-Flow Center Tube provide structural integrity to the filter so it can withstand harsher conditions; It's built to last, keeping your engine strong for the long run
- The package length is 7.62 centimeters
- The package height is 7.366 centimeters
- The package width is 7.366 centimeters
- Package Weight : 0.249 kilograms
- Reference OE part number: LF0214342,LF0214700
- Fit For 2001-2010 Mazda B2300,Fit For 2003-2008 Mazda 6 2.3 L4,Fit For 2004-2013. Mazda 3,Fit For 2005-2006 Mazda Tribute 2.3 L4
- Fit For 2006-2010 Mazda 5,Fit For 2006-2013 Mazda MX-5 Miata,Fit For 2007-2012 Mazda CX-7,Fit For 2008 Mazda Tribute 2.3 L4
- Fit For 2009-2013 Mazda 6 2.5 L4,Fit For 2011 Mazda Tribute 2.5 L4,Fit For 2012-2013 Mazda 5
- Fitment Type:Direct Replacement
The best way to check your oil level is when the engine has been off for five minutes. The best time to change your oil is between 4000 and 7000 miles, although you should follow the manufacturer’s recommendations found in your car manual. If it needs an immediate change then a good rule of thumb is that if it smells burnt or there are visible particles on top of the oil, have it changed immediately.
Mazda Miata owners only need about four quarts unless they’re going racing where up to seven might be required depending on how many laps they do during a race weekend.
Last update on 2025-05-20 / Affiliate links / Images from Amazon Product Advertising API