The best motor oil for Nissan Murano will depend on your driving habits and whether you want to focus more on performance or fuel economy. If you’re looking for something that is best for both, then we recommend a full synthetic motor oil like Mobil 1. Synthetic oils provide better protection against engine wear as well as increased fuel efficiency. The downside of these types of oils is the cost — they are usually much more expensive than conventional oils.
In this blog post, we’ll go over some other factors to consider when choosing the best motor oil for Nissan Murano so that you can make an informed decision!
2002 2003 2004 2005 2006 2007 Nissan Murano Engine Oil Capacity
2002-2007 Nissan Murano Engine Oil Capacity
3.5L 6-cyl VQ35DE engine:
- Engine Oil Capacity with filter: 4.2 quarts (4 liters);
- Oil Type: 5W-30;
- Oil pan drain plug tightening torque: 22-29 ft/lbs.
2009 2010 2011 2012 2013 2014 Nissan Murano Engine Oil Capacity
2009-2014 Nissan Murano Engine Oil Capacity
3.5L 6-cyl VQ35DE engine:
- Engine Oil Capacity with filter: 4.9 quarts (4.6 liters);
- Oil Type: 5W-30;
- Oil pan drain plug tightening torque: 25 ft/lbs.
2015 2016 2017 2018 2019 2020 2021 2022 Nissan Murano Engine Oil Capacity
2015-2022 Nissan Murano Engine Oil Capacity
3.5L 6-cyl VQ35DE engine:
- Engine Oil Capacity with filter: 5.1 quarts (4.8 liters);
- Oil Type: 0W-20, 5W-30;
- Oil pan drain plug tightening torque: 25 ft/lbs.
2.5L 4-cyl QR25DER engine:
- Engine Oil Capacity with filter: 6.1 quarts (5.8 liters);
- Oil Type: 0W-20, 5W-30;
- Oil pan drain plug tightening torque: 25 ft/lbs.
How Much Oil Does a Nissan Murano Take?
2022 3.5L Nissan Murano takes 5.1 quarts of 0W-20 oil with a filter. 2.5L Nissan Murano takes 6.1 quarts of 0W-20 oil with a filter.
The oil and filter change regimens for your engine are determined by the quality of the oils and filters used. Using engine oil and filters that aren’t of good quality, or going over recommended oil change intervals, may reduce engine life. Improper maintenance or use of incorrect oil and filter quality and/or viscosity
Your engine was filled with high-quality engine oil when it was manufactured. You don’t have to change the oil before your car’s first suggested changing period has expired. Oil and filter replacement intervals are determined by how you drive your automobile.
Recommended Engine Oil Capacity For Nissan Murano
To ensure long life and satisfactory performance, you must select the proper grade, quality, and viscosity engine oil.
For more information, see “Recommended fluids/lubricants and capacities” in this chapter. NISSAN suggests using energy-efficient oil to enhance fuel efficiency. Engine oils that have been certified by the American Petroleum Institute (API) or International Lubricant Standardization and Approval Committee (ILSAC) and SAE viscosity standard are only recommended.
On the front of each container, you’ll notice an API certificate. Engine damage can be caused by oils that do not have the promised quality seal.
Best 5W-30 Nissan Murano Oil
- Genuine Nissan 5W-30 Oil Change Kit
- Qty. 5 Quarts of Genuine Nissan Motor Oil 5W-30
- Includes Genuine Nissan Oil Filter 15208-65F0E (Small Nissan Filter)
- Includes Copper Washer 11026-JA00A
- Manufactured By ExxonMobil Oil Corporation
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A3
- Or one year, whichever comes first
- Mobil Full Synthetic 5W-30 motor oil is formulated for vehicles upgrading from conventional oil or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent sludge and deposit formation, to help reduce engine wear, and has balanced additive system formulation
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- Ultimate protection against wear, friction, heat and deposits, the main reasons for engine breakdown
- 24x stronger protection against engine-killing contaminants than the industry-leading full synthetic
- Dual Defense Additive Technology helps keep your engine clean and running at peak performance for optimal fuel economy and performance
- 10X stronger against oil breakdown and 50% greater wear protection than industry standards
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, dexos 1 Gen 3
- Full synthetic 5W-30 engine oil designed for vehicles with more than 75,000 miles
- Backed by a 15,000-mile protection guarantee* to keep you covered between oil changes and for the long run
- Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
- Proven to help stop leaks for engines with more than 75,000 miles
- Formulated to deliver less oil burn-off than high-mileage motor oils made from crude oil
- High Mileage 5W-30 synthetic blend engine oil specially formulated to help stop leaks and reduce oil consumption in worn engines
- Recommended for vehicles with more than 75,000 miles
- Helps prevent sludge and other damaging deposits
- Proven wear protection for engine parts
- Suitable for modern turbocharged engines where low-speed pre-ignition protection is required
- Full synthetic 5W-30 motor oil provides strong engine performance and protection against deposits between oil changes
- Ideal for use in modern turbocharged engines and high-performance vehicles like sports cars, SUVs, trucks, and minivans
- Designed to deliver more power and less friction, reducing friction to maximize horsepower (compared to Quaker State motor oil)
- Provides improved fuel economy (based on the latest industry standard)
- Excellent protection against formation of sludge and other harmful deposits (based on Sequence IIIH & VH tests on 0W-20 engine oil)
Best 0W-20 Nissan Murano Oil
- Genuine Nissan Synthetic 0W-20 Motor Oil
- Suitable For All Makes & Models That Require 0W-20 Motor Oil
- Meets The Requirements of ILSAC GF-5 API,SN,SM,SL
- Manufactured By ExxonMobil Oil Corporation
- Qty. (6 Quarts)
- Genuine Nissan 0W-20 Oil Change Kit
- Qty. 5 Quarts of Genuine Nissan Motor Oil 0W-20
- Includes Genuine Nissan Oil Filter 15208-65F0E (Small Nissan Filter)
- Includes Copper Washer 11026-JA00A
- Manufactured By ExxonMobil Oil Corporation
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Approved and Licensed Specifications: Exceeds API SP/SN PLUS/SN/SM |ILSAC GF-6 | GM dexos1 Gen 3 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade |**As measured in Seq IX test under high load/torque conditions vs. API SP test limits | ***Or one year, whichever comes first
- Ultimate protection against wear, friction, heat and deposits, the main reasons for engine breakdown
- 24x stronger protection against engine-killing contaminants than the industry-leading full synthetic
- Dual Defense Additive Technology helps keep your engine clean and running at peak performance for optimal fuel economy and performance
- 10X stronger against oil breakdown and 50% greater wear protection than industry standards
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, dexos 1 Gen 3
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changesm,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Full synthetic 0W-20 motor oil that is made with natural gas and designed to maximize engine protection
- Backed by a 15,000-mile protection guarantee* to protect your pursuit of every mile
- Provides better fuel economy (based on the latest industry standards)
- Keeps pistons cleaner than the toughest industry standard (based on Sequence IIIH results)
- Provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30)
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | GM dexos1 Gen 3 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
Recommended Engine Oil Filter For Nissan Murano
- Proven protection for up to 10,000 miles
- Engineered for use with conventional or synthetic motor oil
- A special blend of fibers and resin creates a proprietary filter media that captures 95% of dirt particles that can cause harmful engine wear
- Designed for everyday drivers who perform frequent maintenance on their vehicles
- 95% dirt-trapping efficiency
- TOP QUALITY / GUARENTEED【Interchange Part Number】: (Engine oil filter) 1520865F0E, 15208-65F00, 15208-65F01 and 15208-65F0D. (Drain plug gasket) 11026-JA00A.
- 【Features】: (Engine oil filter) Original part manufactured with a unique blend of natural and synthetic materials in the filter media for better oil filtration and increased engine protection. (Drain plug gasket) High quality and durable part made of aluminum, fixed the same as OEM.
- 【Package Includes】: Package of 8 x 3 x 3 x 3 x 3 in. with three (3 pcs.) OEM 15208-65F0E engine oil filters and three (3 pcs.) pieces of 4STEED MOTORS 11026-JA00A drain plug gasket
- 【Recommendations】: Before making the purchase, FIRST CONSULT your trusted MECHANIC to make sure they are the parts you need and check in the table below the compatibility and the workshop of your vehicle with the product
- 【Compatible with】: Rogue Sport, Frontier, Pathfinder, Quest, Murano, Titan, Sentra, Versa, Juke, 370Z, Armada, Altima, NV 200 y otros (ver descripción más abajo). (INFINITI) FX35, EX35, EX37, FX37, G20, G25, G35, G37, I30, I35, JX35 y otros (ver descripción más abajo o garaje)
- Vehicle Specific
- Manufacturer Warranty
- NIssan Quality Assured
- OEM, Not After Market
- Vehicle Specific
- TOP QUALITY/ GUARANTEED
- 【Interchange Part Number】: (Engine Oil Filter) 1520865F0E, 15208-65F00, 15208-65F01 and 15208-65F0D. (Drain Plug Gasket) 11026-JA00A. It is important to verify that the part number of what you are ordering applies to your vehicle. This way you can be sure that you are getting the right part
- As for the DRAIN PLUG CRUSH WASHER GASKET many people take it for granted that aluminum and copper do not need to be replaced. However, they do "harden". Yes, you may be able to reuse the old one 1 or 2 times, but every time you reuse it, you are increasing the chances of a leak. Really, it's a small price to pay to do the job correctly and reduces the risk of oil leaks. If your mechanic confirms the failures of these parts you should replace them INSTANTLY to avoid downtime for your car
- 【Features 】: (Engine Oil Filter) Original part made with a unique blend of natural and synthetic materials in the media for better oil filtration and enhanced engine protection. (Drain Plug Gasket) High quality and durable part made of aluminum, fixed same as OEM
- 【Package Includes】: 8 x 3 x 3 x 3 inches package with one (1 pc) OEM 15208-65F0E engine oil filters and one (1 pc) of 4STEED MOTORS 11026-JA00A drain plug gasket
- LONG-LASTING: This engine oil filter has a proven protection for up to 10,000 miles.
- OPTIMAL PERFORMANCE: Engineered for use with conventional or synthetic motor oil. Extra Guard has cellulose and glass blended media that provides advanced engine protection for your vehicle.
- ENGINE PROTECTION: A special blend of fibers and resin creates a proprietary filter media that captures 95% of dirt particles that can cause harmful engine wear.
- EASY INSTALLATION: It has SureGrip that provides non-slip surface for easier installation and removal of the oil filter.
- EVERYDAY OIL FILTER: Designed for everyday drivers who perform frequent maintenance on their vehicles. Engineered with a silicone anti-drain back valve, Extra Guard meets all manufacturer’s recommended change intervals.
Last update on 2025-03-15 / Affiliate links / Images from Amazon Product Advertising API